Panasonic WJ-ND300 Administrator Console Operating Instructions Manual page 17

Screenshot 2
The "Upload" window will be displayed.
Screenshot 3
The "Mask Setup" window will be displayed.
Step 2
Enter the address of the network disk recorder to which
the setup file is to be uploaded.
Step 3
Enter the HTTP port number of the network disk
recorder.
Step 4
Enter the Adminisrator password of the network disk
recorder.
Step 5
When any settings of the following items are not to be
uploaded, check the "Mask Setup Data" checkbox and
click the [Property Settings] button.
When all of the settings are to be uploaded, go to step 8
after confirming that the "Mask Setup Data" check box is
not checked.
Step 6
Check the checkbox next to the setup item not to be
uploaded.
Note:
At the default setting, the setting values of the
"Camera"– "NW Camera Setup" and "Comm" –
"Basic Setup" are set as a masked item.
Step 7
Click the [OK] button.
17