Advertisement
fig.6
6.5.
Equipping the winch with its roller fairlead (supplied) will substantially reduce wear on the wire rope during angle pulls, because
rollers eliminate heavy rubbing and abrasion to the wire rope, see fig.8.
NOTE:
DO NOT winch your vehicle in gear or in park, which would damage your vehicle's transmission.
DO NOT wrap the wire rope around an object and hook the cable back onto itself, this can cause damage to the object being pulled
8
and kink or fray the wire rope. (Use a Self Recovery Kit).
Keep hands, clothing, hair and jewellery clear of the drum and cable when winching.
9
DO NOT use the winch if the cable is frayed, kinked or damaged.
8
DO NOT allow anyone to stand near the cable, or in line with the cable or behind the winch while it is under power. If the cable
8
should slip or break it can suddenly whip back towards the winch, causing great danger for anyone in the area. Always stand well to
the side while winding and use a Wire Rope Dampener.
DO NOT leave the switch plugged in when the winch is not in use.
8
CHECK THE WINCH THOROUGHLY AND CAREFULLY BEFORE OPERATING!
9
7. MAINTENANCE
7.1.
It is strongly recommended that the winch is used regularly (once a month). Simply power out 12m of cable, free spool 5m then
power back in. This will keep all the components in good working condition so that the winch can be relied on when needed.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.7
01284 703534
sales@sealey.co.uk
Original Language Version
fig.8
www.sealey.co.uk
ATV1000W
Issue 1
09/09/21
Advertisement
