Advertisement
Available languages
Available languages
Assembly
8
Place the monitor on the rear
stay so that the two feet of the
monitor go into the two round
holes on the top of the rear
stay.
Note
When placing the monitor, be
sure to hold the handles of the
monitor.
9
Assemble the right and left
base frames to the monitor
using four screws B (4×8 mm,
gold).
10
Attach the right and left side
covers to the monitor using
four screws D (4×8 mm,
silver).
(The right and left side covers
are in the same shape.)
11
Connect the cable to the
monitor control unit connector
at the rear of the monitor, and
fasten the screws of the cable
connector.
4 (E)
Side cover
Screw D
Screw D
Monitor control
unit connector
Monitor
Base frame
Screw B
Monitor control unit connector
Screw B
Side cover
Screw D
Screw D
Cable
Advertisement
