Operation - Craftsman CMEPW1800 Instruction Manual

Attaching Nozzles (Fig. E)

DANGER: Risk of fluid injection. Do not direct
discharge stream toward persons, unprotected skin,
eyes or any pets or animals. Serious injury will occur.

WARNING: Flying objects could cause risk of serious
injury. DO NOT attempt to change nozzles while
pressure washer is running. Turn pressure washer unit
OFF before changing nozzles.
To connect the 40° white nozzle
nozzle 15 to the spray wand
collar 3 toward the spray wand and insert the appropriate
nozzle. Release the quick connect collar to lock the nozzle
in place.
To ensure nozzle is locked into place, give the nozzle a firm
tug after the quick connect collar has locked into place.
Spray Tip Application
40° White Nozzle For gentle wide area cleaning.
Black Turbo Nozzle For abrasive cleaning.
Fig. E
2
3
Attaching High Pressure Foam Cannon
(Fig. F)
1. To connect the high pressure foam cannon
spray wand 2 , pull the quick connect collar
the spray wand and insert the soap bottle.
2. Release the quick connect collar
pressure foam cannon
3. Give the high pressure foam cannon
the quick connect collar has locked into place to ensure
the high pressure foam cannon
4. To adjust the rate of foam, rotate the pressure
control knob 22 on the top of the high pressure
foam cannon 13 counterclockwise for less or
clockwise for more foam.
nOTE: The soap bottle should be positioned underneath
the spray wand. Do not position the high pressure
foam cannon above the spray wand as this will lead to
soap dripping on the spray wand. The spray tip on the
high pressure foam cannon
horizontal application.
16 or the black turbo
2 , pull the quick connect
13 to the
3 toward
3 to lock the high
13 in place.
13 a firm tug after
13 is locked into place.
13 rotates for vertical or
Fig. F

OPERATION


WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can cause injury.
Proper Hand Position (Fig. G)

WARNING: To reduce the risk of serious personal
injury, ALWAYS use proper hand position as shown.

WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the spray handle
grip 5 . Hold the spray wand
Fig. G
Test Ground-Fault Circuit-Interrupter
(GFCI) Before Each Use
This pressure washer is provided with a ground-fault circuit-
interrupter (GFCI) built into the plug of the power-supply
cord. This device provides additional protection from the
risk of electric shock.
1. Plug the Ground Fault Circuit Interrupter (GFCI) into a
working grounded outlet.
2. The indicator at the top of the GFCI should turn green
when product is ready to use.
3. Press the "TEST" button (bottom). The green indicator
should disappear.
4. Press "RESET" button for use. Do not use if the above
test fails.
English
22
13
3 2
4 securely with other hand.
4 5
5