Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Electrolux EEM69410L
Summary of Contents for Electrolux EEM69410L
- Page 1 EEM69410L Dishwasher User Manual...
-
Page 2: Table Of Contents
13. ENVIRONMENTAL CONCERNS..............28 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. - Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
-
Page 4: Safety Instructions
Only a qualified person must install this appliance. www.youtube.com/electrolux www.youtube.com/aeg • Remove all the packaging. How to install your AEG/Electrolux • Do not install or use a damaged 60 cm Sliding Door Dishwasher appliance. • Follow the installation instructions supplied with the appliance. - Page 5 ENGLISH • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. • Always use a correctly installed shockproof socket. • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug and to the mains cable.
-
Page 6: Product Description
switches,... -
Page 7: Control Panel
ENGLISH 3.1 Beam-on-Floor • The red light flashes when the appliance has a malfunction. The Beam-on-Floor is a light that is The Beam-on-Floor is off displayed on the floor below the when the appliance is appliance door. deactivated. • A red light comes on when a programme starts. -
Page 8: Programme Selection
Indicator Description Machine Care indicator. It is on when the appliance needs internal cleaning with the Machine Care programme. Refer to "Care and cleaning". Drying phase indicator. It is on when you select a programme with the drying phase. It flashes when the drying phase operates. Refer to "Programme selection". - Page 9 ENGLISH 5.4 Programmes overview Programme Dishwasher Degree of Programme phases EXTRAS load soil Quick Crockery, Fresh • Dishwashing 50 °C • ExtraPower cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • ExtraHy‐ giene • AirDry • Prewash Not applicable Pre-rinse Crockery,...
-
Page 10: Basic Settings
Consumption values Water (l) Energy (kWh) Duration (min) 1)2) Programme Quick 10.9 0.610 Pre-rinse 0.010 11.8 0.880 1h 30min 11.9 0.970 2h 40min 12.2 1.140 11.0 0.757 AUTO Sense 12.2 1.140 Machine Care 10.5 0.590 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values. - Page 11 ENGLISH Number Setting Values Description Latest pro‐ Enable or disable the automatic selec‐ gramme selec‐ Off (default) tion of the most recently used pro‐ tion gramme and options. 1) For more details, refer to the information provided in this chapter. You can change the basic settings in How to enter setting mode setting mode.
- Page 12 6.2 Factory reset Press any button to exit the cycle counter. Factory reset restores the factory After reaching 65535, the defaults. Before the reset, make sure the cycle counter restarts. appliance is in setting mode. Press and hold Previous and Next for 5 6.4 The water softener...
- Page 13 ENGLISH Regeneration process Each performed softener rinse (possible For the correct water softener operation, more than one in the same cycle) may the resin of the softener device needs to prolong the programme duration by be regenerated regularly. This process is another 5 minutes when it occurs at any automatic and is the part of the normal point at the beginning or in the middle of...
-
Page 14: Before First Use
When AirDry opens the ajar. door, Beam-on-Floor might not be completely visible. To see if the programme is complete, look at the control panel. 6.8 Key tones The buttons on the control panel make a click sound when you press them. - Page 15 ENGLISH 7.1 The salt container 7.2 How to fill the rinse aid dispenser CAUTION! Use rough salt designed for dishwashers only. Fine salt increases the risk of corrosion. The salt is used to recharge the resin in the water softener and to assure good washing results in daily use.
-
Page 16: Daily Use
8. DAILY USE 1. Open the water tap. The upper ends of the two 2. Press and hold until the appliance vertical ribs inside the is activated. compartment (B) indicate 3. Fill the salt container if it is empty. - Page 17 ENGLISH • The ECOMETER indicates the When the countdown is complete, the updated level of energy and water programme starts. consumption. 8.7 How to cancel the delay By default, options must be start while the countdown activated every time before operates you start a programme.
-
Page 18: Hints And Tips
8.10 The Auto Off function 8.11 End of the programme This function saves energy by switching When the programme is complete, the the appliance off when it is not operating. display shows 0:00. The function comes into operation The Auto Off function switches the automatically: appliance off automatically. -
Page 19: Care And Cleaning
ENGLISH 9.5 Loading the baskets • Make sure that the water softener level is correct. If the level is too high, • Always use the whole space of the the increased quantity of salt in the baskets. water might result in rust on cutlery. •... - Page 20 10.1 Machine Care 10.3 Removal of foreign objects Machine Care is a programme designed Check the filters and the sump after each to clean the appliance interior with use of the dishwasher. Foreign objects optimal results. It removes limescale and (e.g.
- Page 21 ENGLISH 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4.
- Page 22 2. To detach the spray arm from the basket, press the spray arm upwards and simultaneously turn it clockwise. 2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil 3.
-
Page 23: Troubleshooting
ENGLISH 10.8 Cleaning the ceiling spray 2. Move the upper basket to the lowest level to reach the spray arm more easily. 3. To detach the spray arm (C) from the We recommend to clean the ceiling spray delivery tube (A), turn the mounting arm regularly to prevent soil from element (B) counterclockwise and clogging the holes. - Page 24 Problem and alarm code Possible cause and solution You cannot activate the • Make sure that the mains plug is connected to the appliance. mains socket. • Make sure that there is no damaged fuse in the fuse box.
- Page 25 ENGLISH Problem and alarm code Possible cause and solution The level of water inside • Switch the appliance off and on. the appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
- Page 26 Once you have checked the appliance, The PNC can be found on the rating deactivate and activate the appliance. If plate on the appliance door. You can the problem occurs again, contact an also check the PNC on the control panel.
- Page 27 ENGLISH Problem Possible cause and solution There are stains and dry wa‐ • The released quantity of rinse aid is not sufficient. ter drops on glasses and Adjust the rinse aid dosage to a higher level. dishes. • The quality of the rinse aid can be the cause. The interior of the appliance •...
-
Page 28: Technical Information
Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 12. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Voltage (V) 200 - 240 Electrical connection... - Page 32 www.electrolux.com/shop...