Related Manuals for Zanussi ZEAN11FW0
Summary of Contents for Zanussi ZEAN11FW0
- Page 1 User Manual GETTING STARTED? EASY. ZEAN11EW0 ZEAN11FW0 EN User Manual Refrigerator...
-
Page 2: Safety Information
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. - Page 3 This appliance may be used in, offices, hotel guest rooms, bed • & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels. To avoid contamination of food respect the following •...
-
Page 4: Safety Instructions
SAFETY INSTRUCTIONS INSTALLATION • The mains cable must stay below the level of the mains plug. WARNING! Only a qualified person • Connect the mains plug to the mains socket must install this appliance. only at the end of the installation. Make sure that there is access to the mains plug after the •... -
Page 5: Installation
• This product contains one or more light sources • Please note that self-repair or non-professional of energy efficiency class G. repair can have safety consequences and might • Concerning the lamp(s) inside this product and void the guarantee. spare part lamps sold separately: These lamps •... - Page 6 DIMENSIONS Overall dimensions ¹ Overall space required in use ³ 1165 ¹ the height, width and depth of the appliance ³ the height, width and depth of the appliance without the handle including the handle, plus the space necessary for free circulation of the cooling air, plus the space necessary to allow door opening to the minimum Space required in use ²...
-
Page 7: Door Reversibility
• The manufacturer declines all responsibility if in a place with direct sunlight. Make sure that air the above safety precautions are not observed. can circulate freely around the back of the cabinet. • This appliance complies with the E.E.C. This appliance should be installed in a dry, well Directives. -
Page 8: Reversing The Freezer Compartment Door
Wait at least 4 hours before connecting the appliance to the power supply. REVERSING THE FREEZER COMPARTMENT DOOR WARNING! Before carrying out any operations, remove the plug from the power socket. 1. Close the freezer compartment door. Unscrew the screw of the installation button. Place the 9. -
Page 9: Operation
3. Remove the installation buckle and install it on 5. Fit the freezer compartment door and close the opposite side. them. 6. Fix the installation button to the door lower bearing. Press the installation button until there is no gap between it and cavity, then fix the screw. -
Page 10: Temperature Regulation
3. Control button SWITCHING ON SUPER FREEZE FUNCTION Insert the plug into the wall socket. The Super Freeze is used to perform pre-freezing and fast freezing in sequence of Freezer SWITCHING OFF compartment. This function accelerates the freezing of fresh food and, at the same time, protects To turn off the appliance, remove the plug from the foodstuffs already stored from undesirable power socket. -
Page 11: Hints And Tips
VEGETABLE DRAWER products in the compartment let the appliance run at least 3 hours with the Super Freeze function There is a special drawer in the bottom part of the switched on. appliance suitable for storage of fruits and vegetables. Keep the food no closer than 15 mm from the door. - Page 12 HINTS FOR STORAGE OF FROZEN FOOD • Ensure that the packaging is not damaged - the food could be deteriorated. If the package is • Freezer compartment is the one marked with swollen or wet, it might have not been stored in the optimal conditions and defrosting may have •...
-
Page 13: Care And Cleaning
• Always use closed containers for liquids and for • Fruit and vegetables: clean thoroughly (eliminate food, to avoid flavours or odours in the the soil) and place in a special drawer compartment. (vegetable drawer). • To avoid the cross-contamination between •... -
Page 14: Periods Of Non-Operation
compartment. In addition, remove pieces of ice 1. Disconnect the appliance from electricity that break away before defrosting is complete. supply. 5. When defrosting is complete, dry the interior 2. Remove all food. thoroughly. 3. Defrost the appliance. 6. Switch on the appliance and close the door. 4. - Page 15 Problem Possible cause Solution The compressor does not start The compressor starts after a This is normal, no error has oc- immediately after pressing the period of time. curred. "Super Freeze", or after chang- ing the temperature. Door is misaligned or interferes The appliance is not levelled.
-
Page 16: Replacing The Lamp
Problem Possible cause Solution Water flows on the floor. The melting water outlet is not Attach the melting water outlet connected to the evaporative to the evaporative tray. tray above the compressor. Temperature cannot be set. The Super Freeze function is Switch off the Super Freeze switched on. -
Page 17: Technical Data
NOISES SSSRRR! BRRR! CLICK! HISSS! BLUBB! TECHNICAL DATA The technical information is situated in the rating It is also possible to find the same information in plate on the internal side of the appliance and on EPREL using the link https://eprel.ec.europa.eu the energy label. -
Page 18: Environmental Concerns
ENVIRONMENTAL CONCERNS with the symbol with the household waste. Recycle materials with the symbol . Put the Return the product to your local recycling facility or packaging in relevant containers to recycle it. Help contact your municipal office. protect the environment and human health by recycling waste of electrical and electronic appliances. - Page 20 WWW.ZANUSSI.COM/SHOP...