Sanyo DP32242 Owner's Manual page 20

USEFUL FUNCTIONS OPERATION (CONTINUED)
Note:
The prompt will disappear after about 10 sec.
If you repeatedly insert and remove the USB device, the
prompt may not appear.
Manually:
1
Firstly, insert the USB flash memory into USB Port.
2
Press MENU button on the remote control and use
the CURSOR
menu. Press the OK button.
3
USB photo viewer function. Press the OK button.
4
The USB photo viewer will appear. Press OK
button. When you do nothing, it will disappear after
few seconds.
Note:
The viewer will also open even if there are no photo files.
While the USB Photo Viewer is active, the main menu
cannot be displayed.
VIEWING PHOTOS
There are three types of view modes.
Multi View:
This view allows you to search for photos in a grid
format. These pictures are displayed using thumbnail
data in each image file.
1
in one window. If all of the photos will not fit in
one screen, when pressing CURSOR
at the top left thumbnail, the screen will move to
the previous page. Conversely, when pressing
CURSOR button at the bottom right thumbnail,
the screen will move to the next page. CH+ and CH-
buttons can be used to page up/down the photo list
when there are more photos than will fit onto one
screen.
Photos
/USB/
09110807538cdac9e6053c973b.jpg
Navigate
20
buttons to select SETUP
to move the highlight
button
Date : 04-30-2006 14:39:55
1440X900
OK Select CH Page R Back
2
When you select a folder, press OK to move to the
next layer.
3
When you select a photo. Press OK to view the
selected photo in Single view mode.
Single View:
In this view mode, only files located in the selected
directory shall be displayed. This view allows you to
change the photo content manually. When moving from
Multi View to the Single View, the currently selected
photo shall be displayed.
1
Use CURSOR button to view the next photo. Use
CURSOR button to view the previous photo.
2
Use CURSOR button to rotate the image 90°
counterclockwise. Use CURSOR
the image 90° clockwise.
Slideshow:
This view allows you to watch a slideshow of the
photos. In this mode, only files located in the selected
directory will be played.
1
To start slideshow, press OK button in the Single View
mode. You can see the state of Sildeshow is On or Off
at the right bottom.
Date : 10-22-2006 13:48:10
1440X900
Back
R
Date : 10-22-2006 13:48:10
1440X900
Back
R
2
Use CURSOR
or next photo.
To set Display interval and Repeat settings:
Gently insert a supported USB storage device to the
USB port on the rear side of the TV. A prompt will
appear.
1
Press MENU button to open the Photos Menu.
2
Use CURSOR
Display interval or Repeat.
3
Use CURSOR
setting and press MENU button.
To close the Photo Viewer:
1
Press EXIT button then television will return to the
last viewed channel or external input.
button to rotate
Slideshow off
Photos menu
MENU
Slideshow on
Photos menu
MENU
buttons to view the previous
buttons to select either
buttons to adjust the