Philips BDP7200 Quick Start Manual

Troubleshooting

No reaction to the remote control.
Connect the product to the power outlet.

Point the remote control at the product.

Insert the batteries correctly.

Insert new batteries in the remote control.

Cannot play back a disc.
Make sure that the product supports the disc.

Make sure that the Blu-ray Disc player supports the region code of the DVD or BD.

(BD: A: DVD: All or 1)
For DVD+RW/+R or DVD-RW/-R, make sure that the disc is finalized.

Clean the disc.

No video signal on the display device.
Turn on the TV.

Set the TV to the correct external input.

Select the correct video resolution using [OUTPUT] on the front panel.

Press and hold [B (PLAY)] on the front panel for 5 seconds to change the setting back

to its default.
No 5.1-channel audio from the loudspeakers of the audio system.
Does the disc contain 5.1-channel audio? The 5.1-channel audio is not available when

the disc does not contain it.
Does the audio system support 5.1-channel audio? The 5.1-channel audio is not

available when the audio system does not contain it.
In the settings menu, set "HDMI Audio" to "Off".


Need help?

User Manual
See the user manual that came with your Philips Blu-ray Disc
Player.
Online
Go to www.philips.com/welcome.
Hotline
Call 1-888-PHILIPS (1-888-744-5477) for our operators.
E5E10UD_QSG_EN.indd 1
2008 © PHILIPS CONSUMER ELECTRONICS
A Division of Philips Electronics North America Corp
P.O. Box 671539 Marietta, GA 30006 0026
All rights reserved.
Printed in China
E5E10UD
1VMN24456 *****
BLU-RAY DISC PLAYER

Quick Start Guide

What's in the box?
Blu-ray Disc Player
User Manual
RCA Audio / Video Cables
User Manual
BDP7200
1
Connections
2

Basic Setup

3
Enjoy
Remote Control with AC Cord
Batteries (AA x 2)
Quick Start Guide Registration Card
12/26/2007 4:41:18 PM