Canon Inner Finisher-J1 Service Manual page 65

3. Remove the Tray Shift Motor Unit [1].
• 3 Screws [2]
3x
[2]
4. Remove the E-ring [1] and the Gear [2] and the Pin
[3].
5. Remove the E-ring [1], and move the Gear [2], after
that remove the pin [3] and the Bushing [4] and the
Tray Drive Shaft [5].
[5]
[1]
[3]
[2]
[1]
[4]
[2]
[3]
[1]
6. Remove the E-ring [1] and the Pully [2] and the Pin
[3] and the Bushing [4].
7. Move the Bushing [1], and remove the Paper Fold
Unit [2].
[1]
8. Remove the 2 Connectors [1] and the 2 Cables [2].
2x
2x
59
4. Disassembly/Assembly
[4]
[3]
[2]
[1]
[2]
[1]
[2]
[1]
[2]