Table of Contents
Advertisement
Move and Operate Machine Safely
Bystanders can be run over.
Take extra care not to run over bystanders. Confirm the
location of bystanders before moving, or operating the
machine.
Always keep the backup alarm and horn in working
condition (if equipped). It warns people when the
machine starts to move.
Use a signal person when moving, or operating the
machine in congested areas. Coordinate hand signals
before starting the machine.
Use appropriate illumination. Check that all lights are
operable before operating the machine. If any faulty
illumination is present, immediately repair it.
Always keep the cab door closed while operating the
machine.
Check the mirrors and the monitors in the CAB for
problems. If there are problems, replace the problem
parts or clean the mirrors, cameras and monitors.
Refer to Camera Monitor section on the cleaning of the
camera and monitor.
Handle Starting Aids Safely
Starting fluid:
Starting fluid is highly flammable.
Keep all sparks and flame away when using it.
Keep starting fluid well away from batteries and cables.
Remove container from machine if engine does not need
starting fluid.
To prevent accidental discharge when storing a
pressurized container, keep the cap on the container, and
store it in a cool, well-protected location.
Do not incinerate or puncture a starting fluid container.
SAFETY
SA-9
SA-1598
SA-293
Advertisement
Table of Contents
