Brother P-touch PT-D610BT Quick Start Manual

PT-D610BT
The keyboard layout may vary by country.
Thank you for purchasing the PT-D610BT (hereafter referred to as "the Label Printer"). Your
PT-D610BT produces professional, high-quality, durable labels. In addition, the variety of tape
cartridges available allows you to print labels with different widths and exciting colours.
Please read this guide, including the Product Safety Guide section, before using this Label Printer.
After reading this guide, keep it in a safe place.
For FAQs, troubleshooting, and to download software and manuals, visit support.brother.com.
Supplies
Brother TZe Tape Cassette Available widths: 3.5 mm, 6 mm, 9 mm, 12 mm, 18 mm, 24 mm
Head Cleaning Tape Cassette TZe-CL4
Before Use
1. Overview
Tape Viewer
Tape Exit Slot
D02RDP001
Application Download Label
AC Adapter Jack
USB Port
Tape Cassette
Product Safety Guide
Safety Precautions
Be sure to read this section before using the product. It contains important safety instructions.
We recommend that you keep this document nearby for future reference.
• For servicing, adjustments, or repairs, contact Brother customer service or your local Brother dealer.
• If the product operates abnormally or any error occurs, or if any cable is damaged, turn the product off,
disconnect all cables, and contact Brother customer service or your local Brother dealer.
• We assume no responsibility for damages arising from earthquakes, fire, other disasters, actions of third
parties, the user's intentional or negligent operation, misuse, or operation under other special conditions.
• We assume no responsibility for damage (such as losses, loss of business profit, lost profits, business
disruptions, or a lost means of communication) that may result from the use of, or inability to use, the
product.
• We assume no responsibility for damages that may result from incorrect operation of the product by
connecting incompatible equipment or using incompatible software.
• We assume no responsibility for any damages or lost profit arising from the use of labels created with this
product, the disappearance or change of data due to failure, repair, or consumables and we do not accept
any claim from a third party.
• Brother reserves the right to make changes without notice in the specifications and materials contained
herein. Furthermore, Brother shall not be responsible for any damages (including consequential) caused by
reliance on the materials presented, including but not limited to typographical and other errors relating to
the publications.
• For more information about the available software, see the User's Guide on the Brother support website at
support.brother.com.
• The latest version of your product documentation is available on the Brother support website at
support.brother.com.
• The available models, accessories, and supplies may vary depending on the country or region.
• This product is approved for use in the country or region of purchase only.
WARNING
Failure to observe instructions and warnings could result in death or serious injuries.
• DO NOT operate, charge, or store the Label Printer, AC Adapter, USB Cable, and Alkaline Batteries in the
following locations (otherwise a fire, electrical shock, smoke, or damage may occur):
- Near water, such as in a bathroom or near a water heater, or in an extremely humid or cold location.*
- In a location where it is exposed to rain or moisture.
- In an extremely dusty location.
- In an extremely hot location, such as near open flames, heaters, or in direct sunlight.
- In a closed car in direct sunlight.
- In a location where condensation may form.
- At a high altitude.
- During a thunderstorm.
• DO NOT use the Label Printer with a foreign object in it. If water, a metal object, or any other foreign object
enters the Label Printer, disconnect the AC Adapter and remove the batteries (if installed), and then contact
your local Brother dealer for repairs.
• If foreign objects are inserted into the Label Printer or its slots, connectors, ports, or Battery Compartment,
stop using the Label Printer, turn the power off, and then disconnect each cable or remove the batteries
(if installed).
• Stop using the Label Printer if there are noticeable abnormalities such as smell, heat, noise, deformities,
or discolouration.
• DO NOT use a damaged AC Adapter.
To avoid damaging the Label Printer, AC Adapter, USB Cable, or Alkaline Batteries, DO NOT:
- Place heavy objects on them.
- Dissamble or modify them.
- Drop or hit them.
- Allow them to get wet, for example, by handling them with wet hands or spilling liquids on them.
• DO NOT allow babies and children to play with the plastic bag that contained the Label Printer.
Dispose of the bag or keep it away from babies and children. There is a risk of suffocation.
* For more information, see the "Specifications" section in your model's User's Guide.
2. Install Batteries or Connect the AC Adapter
Remove the protective material (first use only) before using the Label Printer.
Batteries
• When using the AC Adapter (AD-E001A):
- Insert the Adapter cord connector into the AC Adapter
Jack on the side of the printer.
- Insert the plug into the nearest standard electrical
socket. For memory backup, we recommend using AA
alkaline batteries (LR6) together with the AC Adapter.
• To safeguard and back up the Label Printer's memory,
when the AC Adapter is unplugged, keep AA alkaline
batteries (LR6) installed in the Label Printer.