JVC RM-LP5G User Manual page 7

Exposure Mode
Auto
Manual
Shutter Priority
Iris Priority
Brightness Priority
[ WB MODE Key ]
●
This Key is used to changed the White Balance of the camera. Each Time is
pressed, the camera will be changed to different WB Mode.Under in difference of
WB mode, the corresponding functions of Knob 1, Knob 2 are different.
The specific functions of the knobs are shown in Table 2:
White Balance Mode
Auto
Manual
[ Fn Keys ]
●
This key is reserved for adding custom functions.
The factory default state is: short press this key to send the command to enter the
Sub-menu of the camera, long press this key for 3 seconds to return to Home Position
of Camera.
⑮ LED DISPLAY
Used to display the current status information & Settings of the keyboard in real time
(including IP address, Port number, serial port address, communication protocol,
Baud Rate and other information) and keyboard menu. The brightness of the display
can be set through the keyboard menu.
When the selected camera brand does not match the camera used, the parameter
values displayed on the screen corresponding to the knob ① /Knob ② / knob ③
may not match the actual parameters of the camera.
Knob 1
NOT USED
Shutter
Shutter
Iris
Iris
Table 1
Knob 1
NOT USED
Red Gain
Table 2
- 6 -
Knob 2
NOT USED Exposure Compensation
Iris
NOT USED Exposure Compensation
NOT USED Exposure Compensation
Gain Exposure Compensation
NOT USED
Knob 3
Gain
Knob 2
Blue Gain