Environmental Protection; Noise/Vibration Information; Declaration Of Conformity - Bosch GST 100 Manual

GST 100/CE - GB Seite 17 Donnerstag, 11. März 1999 8:35 08
In extreme operating conditions (e.g.
when working with non-ferrous metals)
the interior of the machine can become
blocked with cuttings. In such cases it is rec-
ommended to use a stationary extractor, re-
duce the cleaning cycles and connect an
earth-leakage circuit-breaker.
Guide roller 6 should occasionally be checked for
wear and lubricated with a drop of oil. If, after a
long period, it should display extensive wear, it
must be replaced by a professional or at an au-
thorised Bosch Service Station for electric tools.
If the machine should happen to fail despite the
care taken in manufacture and testing, repair
should be carried out by an authorised customer
services agent for Bosch power tools.
For all correspondence and spare parts orders,
always include the 10 digit order number of the
machine!
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2 wire cable.
The wires in the cable are coloured according to
the following code:
strain relief
live = brown
neutral = blue
Do not connect the blue or brown wire to the earth
terminal of the plug.
Important: If for any reason the plug is cut off of
the cable of this machine, it must be disposed of
safely and not left unattended.

Environmental Protection

Recycling raw materials instead
of waste disposal
Machine, accessories and packag-
ing should be sorted for environ-
ment-friendly recycling.
These instructions are printed on recycling paper
manufactured without chlorine.
The plastic components are labelled for catego-
rized recycling.
Guarantee
We guarantee Bosch appliances in accordance
with statutory/country-specific regulations (proof
of purchase by invoice or delivery note).
Damage attributable to normal wear and tear,
overload or improper handling will be excluded
from the guarantee.
In case of complaint please send the machine,
undismantled, to your dealer or the Bosch Serv-
ice Centre for electric power tools.

Noise/Vibration Information

Measured values determined according to
EN 50 144.
Typically the A-weighted sound pressure level of
the tool is 83 dB (A). The noise level when work-
ing can exceed 85 dB (A).
Wear ear protection!
The typical hand-arm vibration is below 2.5 m/s
Service
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
Service
To be fitted
by qualified
Advice line
professional only
FAX
Ireland
Beaver Distribution Ltd.
Greenhills Road
IRL-Tallaght-Dublin 24
Service
FAX
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents: EN 50 144,
EN 55 014, EN 61 000-3, HD 400 according to
the provisions of the regulations 73/23/EEC,
89/336/EEC, 89/392/EEC.
Dr. Alfred Odendahl
Robert Bosch GmbH
Geschäftsbereich Elektrowerkzeuge
Subject to change
BA 2 609 931 399
..............................................
......................................
.............................................................
..................................................
.................................................................

Declaration of Conformity

97
Dr. Eckerhard Strötgen
2
.
(08 95) 83 86 81
(08 95) 83 84 02
(08 95) 83 87 89
(01) 45 15 211
(01) 45 17 127
17