1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. DSL-2730B
  6. User manual

D-Link DSL-2730B User Manual

Hide thumbs Also See for DSL-2730B:
Table of Contents

Advertisement

Quick Links

Download this manual
Table of Contents
D-Link DSL-2730B User Manual
i

Advertisement

Table of Contents
loading

Related Manuals for D-Link DSL-2730B

Summary of Contents for D-Link DSL-2730B

  • Page 1 Table of Contents D-Link DSL-2730B User Manual...

  • Page 2: Table Of Contents

    OTES Outbound Filtering ..................64 Information you will need from your ADSL Service Provider ......9 Bridge Filtering .................... 65 Information you will need about DSL-2730B ..........10 DNS S ...................... 66 ETUP Information you will need about your LAN or Computer ......11 DNS S ..................
  • Page 3 STATUS .......................93 ......................93 EVICE ....................94 IRELESS LIENTS DHCP C ....................94 LIENTS ........................95 ......................96 TATISTICS ....................97 OUTING HELP ........................98 TROUBLESHOOTING ..................99 NETWORKING BASICS ...................101 IP A ................101 HECK DDRESS IP A ..............102 TATICALLY SSIGN DDRESS TECHNICAL SPECIFICATIONS ...............103 D-Link DSL-2730B User Manual...

  • Page 4: Package Contents

    Section 1 - Product Overview Package Contents • DSL-2730B Wireless N 150 ADSL2+ 4-Port Ethernet Router • Power Adapter • CD-ROM with User Manual • One twisted-pair telephone cable used for ADSL connection • One straight-through Ethernet cable • One Quick Installation Guide...

  • Page 5: Features

    • Telnet Connection – The Telnet enables a network manager to access the Router’s management software remotely. • Easy Installation – The Router uses a web-based graphical user interface program for convenient management access and easy set up. Any common web browser software can be used to manage the Router. D-Link DSL-2730B User Manual...

  • Page 6: Hardware Overview

    Push in to power-on the Use the adapter shipped with to your telephone line (RJ-11 Wireless. Push again to Router. Push again to the Router to connect to power port). disable it. power-off the Router. source. D-Link DSL-2730B User Manual...

  • Page 7: Leds

    Section 1 - Product Overview Hardware Overview LEDs D-Link DSL-2730B User Manual...
  • Page 8 Router is active. If the Router power is off, this remains dark. A solid red light indicates there is no DHCP response, no PPPoE response, PPPoE authentication has failed, and/or there is no IP. D-Link DSL-2730B User Manual...

  • Page 9: Hardware Overview

    To use WPS with the Router, you need to have Wireless Clients that support WPS. If you have 1 or more Wireless Clients without WPS support, it is advised to secure your network manually using the Setup Wizard. D-Link DSL-2730B User Manual...

  • Page 10: Installation

    Operating Systems The DSL-2730B uses an HTML-based web interface for setup and management. The Web configuration manager may be accessed using any operating system capable of running web browser software, including Windows 98 SE, Windows ME, Windows 2000, Windows XP, and Windows Vista.
  • Page 11 LAN side of the bridge, such as a PC, a server, a gateway device such as a router or similar firewall hardware. The IP address can be assigned in a number of ways. Your network service provider will give you instructions about any additional connection software or NIC configuration that may be required. D-Link DSL-2730B User Manual...

  • Page 12: Information You Will Need From Your Adsl Service Provider

    ADSL service provider’s network and your computer. If you are setting up the Router for multiple virtual connections, you will need to configure the VPI and VCI as instructed by your ADSL service provider for the additional connections. This setting can be changed in the WAN Settings window of the web management interface. D-Link DSL-2730B User Manual...

  • Page 13: Information You Will Need About Dsl-2730B

    IP address used for DHCP service on the LAN when DHCP is enabled. LAN Subnet Mask for the DSL-2730B This is the subnet mask used by the DSL-2730B, and will be used throughout your LAN. The default subnet mask is 255.255.255.0. This can be changed later.

  • Page 14: Information You Will Need About Your Lan Or Computer

    Ethernet NIC If your computer has an Ethernet NIC, you can connect the DSL-2730B to this Ethernet port using an Ethernet cable. You can also use the Ethernet ports on the DSL-2730B to connect to other computer or Ethernet devices.

  • Page 15: Power On Router

    Remember that this will wipe out any settings stored in flash memory including user account information and LAN IP settings. The device settings will be restored to the factory default IP address 192.168.1.1 and the subnet mask is 255.255.255.0, the default management Username is “admin” and the default Password is “admin.” D-Link DSL-2730B User Manual...

  • Page 16: Network Connections

    MDI-X ports (1x, 2x, etc.) with a crossed cable. Computer to Router Connection You can connect the Router directly to a 10/100BASE-TX Ethernet adapter card (NIC) installed on a PC using the Ethernet cable provided. D-Link DSL-2730B User Manual...

  • Page 17: Configuration

    Section 3 – Configuration Configuration This section will show you how to set up and configure your new D-Link Router using the Web-based configuration utility. Web-based Configuration Utility Connect to the Router To configure the WAN connection used by the Router it is first necessary to communicate with the Router through its management interface, which is HTML-based and can be accessed using a web browser.

  • Page 18: Quick Setup

    Router including how to change IP settings and DHCP server setup. QUICK SETUP Click the Setup Wizard button in the middle of the main window of the Router’s opening page to launch a series of setup windows. D-Link DSL-2730B User Manual...
  • Page 19 QUICK SETUP – CHANGE YOUR ROUTER PASSWORD This window of the Setup Wizard is used to change the Router password. D-Link recommends to help secure your network, the user should change the Current Password from the factory default, admin. The New Password should be between 1 and 16 alphanumeric characters.
  • Page 20 Select a time zone in which you are located from the Time Zone list. Select Enable Daylight Saving and configure the daylight saving information, if the area you are located has daylight saving. Click the Next button to continue. D-Link DSL-2730B User Manual...
  • Page 21 Quick Setup windows. The available Protocol modes are: PPPoE, PPPoA, Dynamic IP, Static IP, and Bridge. Select PPPoE or PPPoA in the Protocol drop-down list to see the D-Link DSL-2730B User Manual...
  • Page 22 Some users may have to adjust the Connection Type from the drop-down menu. The available connection and encapsulation types are VC-Mux, and LLC. Select Dynamic IP in the Protocol drop-down list to see the following items. D-Link DSL-2730B User Manual...
  • Page 23 Select the specific Connection Type from the drop-down menu. The available connection and encapsulation types are LLC and VC-Mux. You may want to. Select Static IP in the Protocol drop-down list to see the following items. D-Link DSL-2730B User Manual...
  • Page 24 ISP. The Internet connection cannot function if these values are incorrect. Select the specific Connection Type from the drop-down menu. The available connection and encapsulation types are LLC, and VC-Mux. Select Bridge in the Protocol drop-down list to see the following items. D-Link DSL-2730B User Manual...
  • Page 25 Select the specific Connection Type from the drop-down menu. The available connection and encapsulation types are LLC and VC-Mux. Click Next to go to the last Setup Wizard window. D-Link DSL-2730B User Manual...
  • Page 26 The Wireless Network will be unsecure if the Security Level is set to None. There are 3 security options that the user can choose called WEP, WPA-PSK or WPA2-PSK.If the user requires no wireless security, deselect the Enable Your Wireless Network option. Click Next to continue. D-Link DSL-2730B User Manual...
  • Page 27 QUICK SETUP – REBOOT TIME INDICATOR The following window opens to indicate the amount of time it will take to reboot the Router. Once the rebooting process is completed, it will go back to the main web page. D-Link DSL-2730B User Manual...

  • Page 28: Internet Setup

    Internet Connection Settings Click the Add button to add a new Internet connection. A new menu appears. After the Internet connection has been established, this menu will display basic information about the Internet (WAN) connection. D-Link DSL-2730B User Manual...

  • Page 29: Pppoe

    Enable Quality of Service: Tick this option to enable Quality of Service. Select WAN Service Type: Choose the appropriate WAN Service Type here. Click PPP over Ethernet (PPPoE) for this section. Enter Service Description: This field will display an automated service description. D-Link DSL-2730B User Manual...
  • Page 30 Static IPv4 Address: When Use Static IPv4 is selected, this selection appears. Enter the Static IP version 4 address used here. Enable IGMP Multicast: Tick this option to allow IGMP packets to go through the WAN interface in both directions. D-Link DSL-2730B User Manual...
  • Page 31 Use the following Static DNS IP address: The user can manually enter the DNS Server IP addresses to use for this connection. Click the Apply button to accept these changes. Click the Cancel button to discard these changes. D-Link DSL-2730B User Manual...

  • Page 32: Ip Over Ethernet

    Enable Quality of Service: Tick this option to enable Quality of Service. Select WAN Service Type: Choose the appropriate WAN Service Type here. Click IP over Ethernet for this section. Enter Service Description: This field will display an automated service description. D-Link DSL-2730B User Manual...
  • Page 33 WAN IP Address: Enter the WAN IP address used in the field. WAN Subnet Mask: Enter the WAN subnet mask used in the field. WAN Gateway IP Address: Enter the WAN gateway IP address used in the field. D-Link DSL-2730B User Manual...
  • Page 34 Primary DNS Server: Enter the main DNS server IP address. Secondary DNS Server: Enter the secondary DNS server IP address. Click the Apply button to accept these changes. Click the Cancel button to discard these changes. D-Link DSL-2730B User Manual...

  • Page 35: Bridge

    Select WAN Service Type: Choose the appropriate WAN Service Type here. Click Bridging for this section. Enter Service Description: This field will display an automated service description. Click the Apply button to accept these changes. Click the Cancel button to discard these changes. D-Link DSL-2730B User Manual...

  • Page 36: Ppp Over Atm (Pppoa)

    Encapsulation Mode: Choose the appropriate Encapsulation Mode here. Service Category: Choose the appropriate Service Category here. Enable Quality of Service: Tick this option to enable Quality of Service. Enter Service Description: This field will display an automated service description. D-Link DSL-2730B User Manual...
  • Page 37 LAN that require PPPoE authentication or if PPPoE clients are running on your LAN that requires authentication for services on the WAN. Enable IGMP Multicast: Tick this option to allow IGMP packets to go through the WAN interface in both directions. D-Link DSL-2730B User Manual...
  • Page 38 Primary DNS Server: Enter the main DNS server IP address. Secondary DNS Server: Enter the secondary DNS server IP address. Click the Apply button to accept these changes. Click the Cancel button to discard these changes. D-Link DSL-2730B User Manual...

  • Page 39: Ip Over Atm (Ipoa)

    Enable Quality of Service: Tick this option to enable Quality of Service. Enter Service Description: This field will display an automated service description. WAN IP Address: Enter the WAN IP address used in the field. WAN Subnet Mask: Enter the WAN subnet mask used in the field. D-Link DSL-2730B User Manual...
  • Page 40 Primary DNS Server: Enter the main DNS server IP address. Secondary DNS Server: Enter the secondary DNS server IP address. Click the Apply button to accept these changes. Click the Cancel button to discard these changes. D-Link DSL-2730B User Manual...
  • Page 41 Maximum Burst Size: Enter the Maximum Burst Size used. Realtime VBR Peak Cell Rate: Enter the Peak Cell Rate used. Sustainable Cell Rate: Enter the Sustainable Cell Rate used. Maximum Burst Size: Enter the Maximum Burst Size used. D-Link DSL-2730B User Manual...

  • Page 42: Wireless Settings

    It has two subcategories: Wireless Basics and Wireless Security. You can either point to the Wireless Settings on the left window and click one of the submenus, or click one of the buttons in the Wireless Settings window. D-Link DSL-2730B User Manual...

  • Page 43: Wireless Basics

    Channels available for wireless LAN communication are subject to regional and national regulation. 6. Select a wireless protocol in the 802.11 Mode drop-down list. 7. Click Apply to save the settings. D-Link DSL-2730B User Manual...

  • Page 44: Wireless Security

    Available security modes are WEP, Auto, WPA2 Only, and WPA Only. 1. Select a wireless security mode in the Security Mode drop-down list. 2. Different settings based on the security mode appear at the bottom of the window. D-Link DSL-2730B User Manual...
  • Page 45 2. Enter the WEP key(s) in the WEP Key 1 to WEP Key 4 fields. 3. Select the authentication as Open or Shared from the Authentication drop-down menu. 4. Click Apply to save the settings. D-Link DSL-2730B User Manual...
  • Page 46 2. Enter a period of time for key updated in the Group Key Update Interval field. Pre-shared Key When WPA-PSK was selected in the WPA Mode drop-down menu, this section appears for the user to enter a shared key. D-Link DSL-2730B User Manual...
  • Page 47 1. Enter the available period of time for authentication, Radius server IP address, its port, and shared secret. 2. Click Apply to save the settings. D-Link DSL-2730B User Manual...

  • Page 48: Local Network

    DHCP on the LAN will also be changed. The IP address pool can be up to 253 IP addresses. There are two options for DHCP service: • You can use the Router as a DHCP server for your LAN. • You can disable DHCP service and manually configure IP settings for workstations. D-Link DSL-2730B User Manual...

  • Page 49: Use The Router For Dhcp

    Edit button, and then enter the information in the appropriate fields in the Add DHCP Reservation (Optional) section. Click the Apply button. A message pops up asking if reboot the system. Click OK to restart the device. D-Link DSL-2730B User Manual...

  • Page 50: Time And Date

    Daylight Savings period will Start and End. When you are finished, click the Apply button. Go to Maintenance > System and click Reboot to restart the device and let your changes take effect. D-Link DSL-2730B User Manual...

  • Page 51: Advanced

    It has three subcategories: Advanced Settings, MAC Filtering and Security Settings. You can either point to the Advanced Wireless on the left window and click one of the submenus, or click one of the buttons in the Wireless Settings window. D-Link DSL-2730B User Manual...

  • Page 52: Advanced Settings

    DTIM Interval: Sets the Wake-up interval for clients in power-saving mode. Preamble Type: This is the length of the CRC (Cyclic Redundancy Check) block for communication between the router and wireless clients. High network traffic areas should select Short preamble type. D-Link DSL-2730B User Manual...
  • Page 53 Generate New PIN: Click this button to generate a new WPS PIN. Wi-Fi Protected Status: The current status of WPS is displayed. Reset to Unconfigured: Click this button to disable WPS. Add Wireless Device Wizard: Click this button to add a new wireless device using WPS. D-Link DSL-2730B User Manual...
  • Page 54 Guest SSID: Enter an additional SSID for the wireless guest network. Visibility Status: Click the radio buttons to make the wireless guest network visible or invisible. User Isolation: Use the drop-down menu to enable (On) or disable (Off) wireless user isolation. D-Link DSL-2730B User Manual...

  • Page 55: Mac Filtering

    Only DENY computers listed to access wireless network of the filtering policy. Click Apply to save the settings. Go to Maintenance -> System and click Reboot to restart the device and let the new settings take effect. D-Link DSL-2730B User Manual...

  • Page 56: Security Settings

    Security Settings button in the Wireless Settings window. 1. Select an SSID from the Select SSID drop-down menu. 2. Select the security type for the SSID from the Security Mode drop-down menu. The detail configurations for various security types are described below. D-Link DSL-2730B User Manual...
  • Page 57 2. Enter the WEP key(s) in the WEP Key 1 to WEP Key 4 fields. 3. Select the authentication as Open or Shared from the Authentication drop-down menu. 4. Click Apply to save the settings. D-Link DSL-2730B User Manual...
  • Page 58 2. Enter a period of time for key updated in the Group Key Update Interval field. Pre-shared Key When WPA-PSK was selected in the WPA Mode drop-down menu, this section appears for the user to enter a shared key. D-Link DSL-2730B User Manual...
  • Page 59 1. Enter the available period of time for authentication, Radius server IP address, its port, and shared secret. 2. Click Apply to save the settings. D-Link DSL-2730B User Manual...

  • Page 60: Port Forwarding

    Edit check box of the entry and click the Edit button. To remove an entry, tick the Remove check box of the entry and click the Remove button. Click the Add button to see the Port Forwarding Setup section. D-Link DSL-2730B User Manual...
  • Page 61 Port End normally and will be the same as the Internal Port Start or External Port End if either one is modified. Click the Apply button to accept the changes. Click the Cancel button to discard the changes. D-Link DSL-2730B User Manual...

  • Page 62: Dmz

    To access the Parent Control menu, click the Parent Control link in the Advanced directory. It has one subcategories: Block MAC Address. You can either point to the Parental Control on the left window and click the submenu, or click the buttons in the Parental Control window. D-Link DSL-2730B User Manual...

  • Page 63: Block Website

    Block Website. To remove a Blocked URL entry in the table, select the entry, and click the Delete icon. To modify a table entry, select the entry, click the Edit icon, make the desired changes, and then click the Apply button. D-Link DSL-2730B User Manual...

  • Page 64: Block Mac Address

    Block Website. To remove a Blocked URL entry in the table, select the entry, and click the Delete button. To modify a table entry, select the entry, click the Edit button, make the desired changes, and then click the Apply button. D-Link DSL-2730B User Manual...

  • Page 65: Filtering Options

    It has three subcategories: Inbound Filtering, Outbound Filtering and Bridge Filtering. You can either point to the Filtering Options on the left window and click one of the submenus, or click one of the buttons in the Filtering Options window. D-Link DSL-2730B User Manual...

  • Page 66: Inbound Filtering

    The Source/Destination Port is the TCP/UDP port on either the LAN or WAN depending on if you are configuring an Inbound Port Type Filter rule. The available selections are Any, Single Port and Port Range. Source/Destination Enter a port or range of ports for the rule. Port D-Link DSL-2730B User Manual...

  • Page 67: Outbound Filtering

    The Source/Destination Port is the TCP/UDP port on either the LAN or WAN depending on if you are configuring an Inbound Type Filter rule. The available selections are Any, Single Port and Port Range. Source/Destination Port Enter a port or range of ports for the rule. D-Link DSL-2730B User Manual...

  • Page 68: Bridge Filtering

    Delete button. To modify an entry in the table, select the entry, click the Edit button, make the desired changes, and then click the Apply button. D-Link DSL-2730B User Manual...

  • Page 69: Dns Setup

    DNS server addresses radio button and enter these IP addresses in the available entry fields for the Preferred DNS Server and the Alternative DNS Server. When you have configured the DNS settings as desired, click the Apply button. D-Link DSL-2730B User Manual...

  • Page 70: Dynamic Dns Setup

    Router. This function will not work without an an entry in the table, select the entry, click the Edit button, make accepted account with a dynamic DNS server. the desired changes, and then click the Apply button. D-Link DSL-2730B User Manual...

  • Page 71: Network Tools

    Quality of Service, Queue Config, Quality of Classification, UPnP, ADSL, SNMP, and TR-069. You can either point to the Network Tools on the left window and click one of the submenus, or click one of the buttons in the Network Tools window. D-Link DSL-2730B User Manual...

  • Page 72: Port Mapping

    Setup table. To remove an entry in the table, select the entry, and click the Delete button. To modify an entry in the table, select the entry, click the Edit button, make the desired changes, and then click the Apply button. D-Link DSL-2730B User Manual...

  • Page 73: Igmp

    IGMP (Internet Group Management Protocol) page is for identical content transmission. When the Enable IGMP Proxy/Snooping check box is selected, Multicast packets are allowed to pass in both directions on the WAN interface. Most users will want to leave this on. D-Link DSL-2730B User Manual...

  • Page 74: Quality Of Service

    Tick the Enable QoS check box, and Select Default DSCP mark from the list to enable the function. When you are finished, click Apply/Save. Go to Maintenance -> System, and click the Reboot button to let your new settings take effect. D-Link DSL-2730B User Manual...

  • Page 75: Queue Configuration

    Delete button. To modify an entry in the table, select the entry, click the Edit button, make the desired changes, and then click the Apply button. D-Link DSL-2730B User Manual...

  • Page 76: Qos Classification

    All of the specified conditions in this classification rule must be satisfied for the rule to take effect. Click the Add button to see the following sections: Network Traffic Class Rule, Specify Classification Criteria and Specify Classification Results. D-Link DSL-2730B User Manual...
  • Page 77 Ether Type: Select the Ethernet type used for this rule. DSCP Check: Select the differentiated service code point check. Protocol: Select the protocol used for this rule. UDP/TCP Source Port: Enter the UDP/TCP source port value. UDP/TCP Dest. Port: Enter the UDP/TCP destination port value. D-Link DSL-2730B User Manual...
  • Page 78 Class Interface: Select the class interface used for this rule. Ether Type: Select the Ethernet type used for this rule. Source/Destination MAC Address: Enter the source/destination MAC address used for this rule. Source/Destination MAC Mask: Enter the source/destination MAC mask value used for this rule. D-Link DSL-2730B User Manual...
  • Page 79 Classification Setup table. To remove an entry in the table, select the entry, and click the Delete button. To modify an entry in the table, select the entry, click the Edit button, make the desired changes, and then click the Apply button. D-Link DSL-2730B User Manual...

  • Page 80: Upnp

    UPnP is a protocol supported by diverse networking media including Ethernet, Firewire, phone line, and power line networking. To enable UPnP for any available connection, tick the Enable UPnP check box, and click the Apply button. D-Link DSL-2730B User Manual...

  • Page 81: Dsl

    To access ADSL, point to the Network Tools on the left window and click DSL submenu, or click the DSL button in the Network Tools window. This page contains a modulation and capability selections to be specified by your ISP. Consult with your ISP to select the correct settings for each. Click Apply if you to save the settings. D-Link DSL-2730B User Manual...

  • Page 82: Snmp

    To access SNMP, point to the Network Tools on the left window and click SNMP submenu, or click the SNMP button in the Network Tools window. Simple Network Management Protocol is a standard for internetwork and intranetwork management. Tick the Enable SNMP Agent check box and configure the parameters for SNMP on this window and then click the Apply button. D-Link DSL-2730B User Manual...
  • Page 83 Click Disable or Enable radio button under Inform to enable or disable the function. Configure the parameters for ACS on this window and then click the Apply button. Click the GetRPCMethods button to get RPC methods from the host. D-Link DSL-2730B User Manual...

  • Page 84: Routing

    It has three subcategories: Static Route, Default Gateway and RIP. You can either point to the Routing on the left window and click one of the submenus, or click one of the buttons in the Routing window. D-Link DSL-2730B User Manual...

  • Page 85: Static Route

    To remove an entry in the table, select the entry, and click the Delete button. To modify an entry in the table, select the entry, click the Edit button, make the desired changes, and then click the Apply button. D-Link DSL-2730B User Manual...

  • Page 86: Default Gateway

    To enable RIP, select the Version (1, 2, or Both) and Operation (Active or Passive), and tick the Enable check box in the corresponding entry. Click the Apply button. Go to Maintenance -> System and click Reboot to restart the device and let your changes take effect. D-Link DSL-2730B User Manual...

  • Page 87: Schedules

    A schedule can only be created if the Router is configured to synchronize time settings with NTP (Network Time Protocol). To configure the NTP option, go to the Time and Date configuration menu in the Setup menu directory. D-Link DSL-2730B User Manual...

  • Page 88: Maintenance

    To reset the Router to its factory default settings, click the Restore Default Settings button. You will be prompted to confirm your decision to reset the Router. The Router will reboot with the factory default settings including IP settings (192.168.1.1) and Administrator password (admin). D-Link DSL-2730B User Manual...

  • Page 89: Firmware Update

    Click the Update Firmware button to begin copying the file. The file will load and restart the Router automatically. Note: Performing a Firmware Upgrade can sometimes change the configuration settings. Make sure to backup the Router’s configuration settings before upgrading the firmware. D-Link DSL-2730B User Manual...

  • Page 90: Access Controls

    Section 3 – Configuration Access Controls To access the Access Controls window, click the Access Controls button in the Maintenance directory. In this page, you can choose to change password, manage the service control or IP address control. D-Link DSL-2730B User Manual...

  • Page 91: Account Password

    Save/Apply button to save the settings. You can configure the idle time between 5 and 30 minutes for the webpage asking you to logout. Click the Apply button. Go to Maintenance -> System and click Reboot to restart the device. D-Link DSL-2730B User Manual...

  • Page 92: Services

    This page lists out all the available services including Telnet, HTTP, ICMP, SNMP, SSH, and TFTP that can enable at LAN, WAN or both. Tick to enable the services, or deselect to disable them. Click the Save/Apply button to save the settings. D-Link DSL-2730B User Manual...

  • Page 93: Ip Address

    Click Add to see the Add IP Address section. Enter an IP address and click Apply in the section. The IP address will show in the table in the Remote Web and Telnet Management section. Tick the Enable Access Control Mode check box to enable the function. D-Link DSL-2730B User Manual...

  • Page 94: Diagnostics

    IP addresses. The diagnostics feature executes a series of tests of your system software and hardware connections. Use this window when working with your ISP to troubleshoot problems. D-Link DSL-2730B User Manual...

  • Page 95: System Log

    Emergency, Alert, Critical, Error, Warning, Notice, Informational and Debugging. Click the Apply button to allow your new settings to take effect. Click View System Log to go to Status -> Logs to see the detail log information. D-Link DSL-2730B User Manual...

  • Page 96: Status

    To access the Device Info window, click the Device Info button in the Status directory. Use this window to quickly view basic current information about the LAN and WAN interfaces and device information including Firmware Version and MAC address. D-Link DSL-2730B User Manual...

  • Page 97: Wireless Clients

    The Connected Wireless LAN Clients list displays in this page. DHCP Clients To access the DHCP Clients window, click the DHCP Clients button in the Status directory. The Connected LAN Clients list displays active DHCP clients when the Router is acting as a DHCP server. D-Link DSL-2730B User Manual...

  • Page 98: Logs

    To access the Logs window, click the Logs button in the Status directory. This page displays the event logs of the Router. Before seeing the log information, make sure the system log function is enabled in the Maintenance -> System Log. Click Refresh to update the log information. D-Link DSL-2730B User Manual...

  • Page 99: Statistics

    To access the Statistics window, click the Statistics button in the Status directory. This page allows you to monitor traffic on the Local Network, Internet or ADSL connection. This window also displays information concerning ADSL status. D-Link DSL-2730B User Manual...

  • Page 100: Routing Info

    Routing Info To access the Routing Info window, click the Routing Info button in the Status directory. This page is used to direct forwarding by matching destination addresses to the network paths used to reach them. D-Link DSL-2730B User Manual...

  • Page 101: Help

    Section 3 – Configuration Help To access the Help window, click the Help directory. D-Link DSL-2730B User Manual...

  • Page 102: Troubleshooting

    Troubleshooting This chapter provides solutions to problems that might occur during the installation and operation of the DSL-2730B. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples.)
  • Page 103 There is a potential security issue if the firewall is disabled on your PC. Please remember to turn it back on once you have finished the whole installation procedure. This will enable you to be able to surf the Internet without any problem. D-Link DSL-2730B User Manual...

  • Page 104: Networking Basics

    Check Your IP Address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 105: Statically Assign A Nip Address

    Windows® 2000 - From the desktop, right-click on the My Network Places > Properties. Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click on the Properties.

  • Page 106: Technical Specifications

    • RFC1389 RIP v2 • LAN interface: RJ-45 port for 10/100BASE-T Ethernet • RFC2433 Microsoft PPP • RFC1577 Classical IP over connection CHAP extensions • RFC2516 PPP over • RFC1483 MER Ethernet D-Link DSL-2730B User Manual...

Table of Contents