Table of Contents
Advertisement
MERC Smart PV Optimizer
User Manual
Method 1: Setting on the FusionSolar WebUI
Log in to https://intl.fusionsolar.huawei.com to access the WebUI of the
FusionSolar Smart PV Management System. On the Home page, click the plant
name to access the plant page. Choose Layout > Edit > Manage Drawings >
Upload > Identify Drawings > Identify to create a physical layout as prompted.
You can also manually create a physical layout.
Figure 3-1 Physical layout design of PV modules
Method 2: Uploading the physical layout template photo on the FusionSolar
app
Issue 05 (2023-03-31)
NO TE
● If smart PV optimizers are configured for PV strings, ensure that the smart PV
optimizers have been successfully connected to the SUN2000 before performing the
operations in this section.
● Check that the SN labels of smart PV optimizers are correctly attached to the physical
layout template.
● Take and save a photo of the physical layout template. Keep your phone parallel to the
template and take a photo in landscape mode. Ensure that the four positioning points in
the corners are in the frame. Ensure that each QR code is attached within the frame.
NO TE
● If you have uploaded the physical layout template photo on the FusionSolar app, skip
the steps of Manage Drawings > Upload.
NO TE
● If there are more than 16 photos, upload them on the FusionSolar WebUI.
● If the number of PV modules in the physical layout exceeds 200, edit the physical layout
on the FusionSolar WebUI.
● For some unidentified QR codes, log in to the FusionSolar WebUI to manually bind them
● For details about the physical layout of smart PV optimizers, see
Quick Guide
. You can scan the QR code to download the quick guide.
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 System Maintenance
FusionSolar App
20
Advertisement
Table of Contents
