Hooking Up The Tv/Dvd 9 - Philips 13MC3206 User Manual

T8201UB_EN 3/7/06 11:41 AM Page 9
1
Hook up your TV/DVD using one
of the connections shown.
A Hooking Up Your TV/DVD with a
Cable TV Signal or Outdoor
Antenna
B Hooking Up Your TV/DVD
with a Cable Box/Satellite Receiver
To view any channel, set the TV/DVD to the
output channel (channel 03 or 04) of the Cable
Box/Satellite Receiver.Then, select channels at
the Cable Box/Satellite Receiver.
Your Cable Box/Satellite Receiver may have Audio and Video Out jacks instead of the single
Antenna Out jack (RF coaxial or 75 ohm) shown here.
If so, connect Audio and Video cables to the Audio/Video Out jacks of the Cable Box/Satellite
Receiver and to the AUDIO/VIDEO In jacks on the front of the TV/DVD.
Press SELECT on the remote to set the TV/DVD to AUX, not channel 3 or 4. Select channels
you want to watch at the Cable Box/Satellite Receiver as usual, leaving the TV/DVD on AUX.
Instructions continue on the next page.

Hooking Up the TV/DVD 9

Connect a Cable TV
signal or an antenna to
the ANT(enna) Jack.
Connect the Cable TV
or Satellite signal to the
IN Jack on the Cable
Box/Satellite Receiver.
ANT.
IN
OUT
Connect an
RF coaxial cable
(not supplied) to
the OUT Jack on
the Cable Box/
Satellite Receiver
and to the
ANT(enna) Jack
on the TV/DVD.
ANT.