Disassembly; Sim Connector - Sony Xpreia acro S Working Instructions

3

Disassembly

The disassembly is done in the following order:

1. SIM Connector

2. Cover Bottom
3. Core Unit Label
4. Cover Back
5. Keys (a) & Charger PAD connector (b) & Caps (c)
6. Touch/Display Front Cover Assy
7. Gasket Main
8. Camera with the holder
9. Rear Cover Assy
10. Spacer Felica (a) & Sheet Key FPC (b) & PBA Flex
Module (c) & PBA (d)
3.1 SIM Connector
Do not touch the sealing rubber of the Cap SIM!
Make sure that the Cap SIM is clean, no dirt, particles
and fiber attached on it!
Pull upwards to release the Cap SIM with fingers.
Pull out the SIM Connector and remove it.
Turn the Cap SIM over.
1267-1071 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
6(76)