Table of Contents
Advertisement
Available languages
Available languages
English
OPERATION
Button Functions (Fig. A)
Power Button
•
To turn the speaker on or off, press and hold the
power button
1
until you hear a sequence of tones
from the speaker.
•
When the speaker is on, momentarily press the power
button
1
and the speaker will say the percentage of
charge remaining in the battery.
•
If the speaker does not respond when buttons are
pressed, press and hold the power button
seconds to reboot the speaker.
Play/Pause Button
When audio device connected via Bluetooth®: Press the
play/pause button
5
to begin playing a selection from the
audio device.
•
Press the play/pause button
again to resume play.
•
To advance to the next track, press the play/
pause button
5
twice quickly.
•
To skip to previous track, press the play/pause button
three times quickly.
Volume Adjustment Buttons
The volume buttons
2
,
3
decrease volume on the speaker.
•
The volume will increase or decrease one level with a
quick press of either volume buttons
•
The volume will increase continuously with a long press
of either volume buttons
Playing Audio
Audio can be played through the speaker via a wireless
Bluetooth® connection to a compatible Bluetooth® audio device.
Pairing Speaker with a Bluetooth®
Audio Device (Fig. A)
1. Place the speaker and the Bluetooth® audio device within
3 ft. (1 m) of each other.
2. Turn on the speaker by pressing and holding the power
button
1
until you hear a sequence of tones. The Bluetooth®
status indicator LED
4
3. Ensure the Bluetooth® audio device has Bluetooth®
turned on. (Please consult your device's instruction
manual for specific pairing instructions.)
4. Momentarily press the Bluetooth® button
the speaker.
5. The blue Bluetooth® status indicator LED
continuously double blink and you will hear tones from
the speaker indicating the speaker is in pair mode.
6. Select D
WALT DCR008 on your device and
e
confirm pairing.
7. Once pairing is successful, the Bluetooth® status indicator
LED
4
will remain illuminated blue and you will hear a
tone from the speaker.
8. The speaker will now play audio from your device.
nOTE: Audio output power: 1x5W.
4
1
for ten
5
again to pause play. Press
can be used to increase or
2
,
3
.
2
,
3
.
will continuously single blink.
6
on
4
will
Bluetooth® status indicator lED
Blink Patterns
Continuously Single
Blinks
Continuously
Double Blinks
Solid light
No light
Connecting a Previously Paired Bluetooth® Audio Device
If a Bluetooth® device has been previously paired to the
speaker, it should automatically reconnect when the speaker
is powered on.
nOTE: The Bluetooth® audio device must have Bluetooth®
turned on to automatically pair.
1. If connection does not occur and you are unable to
stream audio, please follow the instructions for Pairing
Speaker with a Bluetooth® Audio Device.
stereo Pairing with Two speakers
1. On both speakers, simultaneously press and hold the
Bluetooth® button
5
2. Speakers will say "left channel" or "right channel" to
indicate that pairing was successful.
3. The Bluetooth® status indicator LED
left channel speaker and the Bluetooth® status indicator
LED
4
will not be illuminated on right channel speaker.
Timeout Functionality (Fig. A)
To conserve battery life, the speaker is designed to power
off automatically after fifteen minutes of inactivity. This
inactivity could be due to the device being unpaired for
fifteen minutes or the Bluetooth® connection being broken
for the same period of time. If the speaker powers off due
to inactivity of any kind, refer to Connecting a Previously
Paired Bluetooth® Audio Device.
Bluetooth® Range
Optimum Bluetooth® streaming range is roughly 30 ft. (9 m)
with a straight line of sight to the speaker, but distances
up to 100 ft. (30 m) are possible. Physical obstacles, other
wireless devices or electromagnetic devices may affect the
connection quality.
•
If Bluetooth® connection is lost due to exceeding time of
separation, exceeding the optimum distance, obstacles
or otherwise, reconnecting your device with the speaker
may be necessary.
incoming Call
•
If your phone receives a call while it is connected to the
speaker, it will pause the Bluetooth® connection.
•
When the call is disconnected, the speaker will
automatically switch back to the Bluetooth® connection.
status/Mode
Speaker Bluetooth® is on.
Speaker is in pairing mode and
discoverable by your device.
Speaker is connected with a device.
Speaker has timed out and/or is off.
6
for three seconds.
4
will be blue on the
Advertisement
Table of Contents
