Av3 Output; Connection Guide; Auto Cinema; Rgb Centring - Sony WEGA KP-51PX3 Operating Instructions Manual

AV3 OUTPUT

This option allows you to select the source to be output from the Scart connector
3/ 3 so that you can record from this Scart any signal coming from the TV or from an
S
external equipment connected to the Scart connector
connectors 4 or 4 and
S
If your VCR supports SmartLink, this procedure is not necessary.
To do this:
Once you have entered into the "Features" menu as it is explained in the previous page and after
selecting the option, press OK. Then press
TV to output the aerial source.
AV1 to output sources connected to
AV2 to output sources connected to
AV4 to output sources connected to
AUTO to output the signal that is being viewed on the TV.
• If you select "AUTO", the output signal will always be the same one that is displayed on
the screen.
• If you have connected a decoder to the Scart
Scart, please remember to change back the "AV3 Output" to "TV" for correct
unscrambling.

CONNECTION GUIDE

Even you have already connected the external equipment to the TV set, it is important for you to
follow the instructions of this menu. If you proceed in this way, you will get the optimum picture
settings related with the optional equipment.
To do this:
1
Once you have entered the "Features" menu as it is explained in the previous page and after
selecting the option, press OK. Next press
among the available: SAT (satellite), Decoder, DVD, GAME, VIDEO or DVD rec. (DVD
b
recorder). Next press
B
by pressing ). Once you have selected all the equipment to be connected, press
select "Confirm" and press OK.
2
A new menu will appear showing you on which Scart connector of the rear of the TV should be
connected each equipment. Please connect each equipment according to this information to get
the optimum picture setting of the optional equipment.
3
Once you have connected the optional equipment, press
the OK button of the remote control.
We strongly recommend you to follow our connection proposals, but in case you do not agree press
B b
or
to select "No" and next press the OK button. A new menu appears on the screen in which you
can assign the connections according to your preferences.

AUTO CINEMA

This TV set has a sensor which is able to detect the ambient light of the room, by using this option
the TV automatically changes the picture settings to the best ones according to the ambient light in
the room.
To do this:
Once you have entered into the "Features" menu as it is explained in the previous page and after
selecting the option, press
alters the picture settings according ambient light) or Off (if you wish to keep your preference).
"Auto Cinema" will switch off automatically if "Picture Mode" or any of the picture settings is
altered.

RGB CENTRING

This option is only available if an RGB source has been connected to the TV.
This option allows you to readjust the horizontal position of the picture in case you need to do it
when connecting an RGB source.
To do this:
Once you have entered the "Features" menu as it is explained in the previous page and while
watching an RGB source select the "RGB Centring" option and press OK. Then press
adjust the centre of the picture between –5 and +5. Finally press OK to confirm and store.
4.
v V
or to select the desired output signal:
1/
2/
4 or
v V
or
to select the equipment chosen (equipment selected also can be deleted
b v V
. Then press or to select On (if you want the TV automatically
1/ 1, 2/ 2 or right side
1.
2.
4 and 4.
S
3/ 3 or to a VCR connected to this
S
to chose the equipment you want to connect
B b
or to select "OK" and finally press
TV Functions
GB
v V
or to
v V
or to
17