Covered Boom Kit
Multi Pro
Model No. 41602—Serial No. 315000001 and Up
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
Important: Air induction Flat Fan nozzles (AIC TeeJet) are recommended for use with the covered boom kit to
avoid chemical buildup on the covers during application. Refer to Toro's nozzle chart for details.
Note: The Spring Upgrade Kit, Part No. 120-8508 should
be installed with the Covered Boom.
© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Turf Sprayer with Truss-Style Boom
Description
Center boom bracket (models 2014 and
older)
Boom mount plate
U-nut
Hex head screw, 3/8 x 1-1/4 inch
Model/serial number decal
Regulatory decal (119-4986)
Flange nut (3/8 inch)
Washer plate
Hex head screw, 5/16 x 1-1/4 inch
Center-boom bracket (models 2015 and
newer)
Wing-boom cover
Washer plate
U-nut
Hex-head bolts, 5/16 x 1-1/4 inch
Drain-valve-mount bracket
Carriage screw (3/8 x 1-1/4 inch)
Flange nut (5/16 inch)
No parts required
Register at www.Toro.com.
Form No. 3396-821 Rev A
Qty.
2
2
4
4
1
Install the center boom brackets and
cover.
1
4
2
4
2
2
16
Install the wing boom covers.
12
12
1
2
Install the drain valve mount bracket.
2
Check that the boom covers have
–
proper clearance.
Original Instructions (EN)
All Rights Reserved *3396-821* A
Printed in the USA
Operator's Manual
Use