Page 1 Version 2.00 | 2019/02/11 User Manual Wireless AC750 Dual Band Router DIR-809...
Page 2 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description 2.00 11 February, 2019 Initial release for revision B1 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
Page 3: Table Of Contents
Manual Internet Connection Setup ......36 Advanced Network ............103 Wireless Settings ..............46 Guest Zone ................. 104 Wireless Connection Setup Wizard......47 IPv6 Firewall ............... 105 Add Wireless Device with WPS ........50 IPv6 Routing ..............107 Manual Wireless Connection Setup ......53 D-Link DIR-809 User Manual...
Page 4 Connect a Wireless Client to Your Router .....128 WPS Button ................128 Windows® 10 ................129 Windows® 8 ................131 WPA/WPA2 ................. 131 Windows® 7 ................133 WPA/WPA2 ................. 133 WPS ..................135 Windows Vista® ................. 139 D-Link DIR-809 User Manual...
Page 5: Package Contents
Quick Install Guide If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-809 will cause damage and void the warranty for this product.
Page 6: System Requirements
Utility Requirements • Firefox 28 or higher • Safari 6 or higher • Chrome 28 or higher Windows Users: Make sure you have the latest version of Java installed. ® Visit www.java.com to download the latest version. D-Link DIR-809 User Manual...
Page 7: Introduction
NAT) to prevent potential attacks over the Internet. The DIR-809 is full of features to improve your home network. The rich parental controls allow you to easily control when the Internet should be available in your home and what content is allowed. With all this and more, the DIR-809 Wireless AC750 Dual Band Router will serve your network well for years to come.
Page 8: Features
• Fast Wired LAN and WAN Networking - With four 10/100 Fast Ethernet LAN ports, and a 10/100 Fast Ethernet WAN port, the DIR-809 has an enormous amount of bandwidth to take full advantage of the highest speed broadband connections available.
Page 9: Hardware Overview
The Wireless LED indicates that this wireless band is working. It blinks during wireless data transmission. Internet The Internet LED indicates that an Internet link is established. It blinks during data transmission. The WPS LED blinks during the WPS pairing process. D-Link DIR-809 User Manual...
Page 10: Connections
Press to start the WPS process and automatically create a secure connection to a WPS client. Internet Port Using an Ethernet cable, connect your broadband modem to this port. LAN Ports (1-4) Connect Ethernet devices such as computers, switches, storage (NAS) devices and game consoles. D-Link DIR-809 User Manual...
Page 11: Device Mode
Repeater Mode By default, the DIR-809 ships in Router Mode. If you wish to change to another mode, ensure that initial setup in Router Mode is complete, and then change to the desired mode, described in Device Mode on page 82.
Page 12: Router Mode
Router Mode In Router Mode, the DIR-809 connects to your cable modem, DSL modem, or other Internet source and shares your Internet connection with your devices wirelessly, providing Internet access for an entire home or office. This is the default and recommended mode.
Page 13: Repeater Mode
Repeater Mode In Repeater Mode, the DIR-809 extends the range of an existing wireless network. You can use this to extend the coverage of an existing wireless router to provide better signal for parts of your home or office that may have poor reception. Additionally, you can use this mode to connect a wired device to a wireless network, which can be useful for devices that do not have a built-in wireless card, such as some smart TVs, game consoles, or DVRs.
Page 14: Installation
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET, BroadJump, or EnterNet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-809 User Manual...
Page 15: Wireless Installation Considerations
The key to maximizing wireless range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 1 to 30 meters (3 to 90 feet). Position your devices so that the number of walls or ceilings is minimized.
Page 16: Hardware Setup
Hardware Setup 1. The DIR-809 is designed to give you the fastest, most stable network connection possible. In order to maximize performance, fully extend the antennas to provide optimal wireless coverage. Keep the router in an open area for better wireless coverage.
Page 17 6. Connect the supplied power adapter to the router and a power outlet, press the power button, and verify that the power LED is lit. Allow 1 minute for the router to boot up. Modem DIR-809 RESET POWER POWER PORT INTERNET D-Link DIR-809 User Manual...
Page 18 INTERNET If you are configuring the DIR-809 from a PC with a wired Ethernet connection, plug one end of an Ethernet cable into the port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer.
Page 19: Completing Setup
There are several different ways you can configure your router to connect to the Internet and connect to your clients: • D-Link Setup Wizard - This wizard will launch when you log into the router for the first time, refer to Setup Wizard on page 16.
Page 20: Setup Wizard
WELCOME TO THE D-LINK SETUP WIZARD WELCOME TO THE D-LINK SETUP WIZARD This wizard will guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. The wizard is designed to guide you through a step-by-step process to configure your new •...
Page 21 For Username / Password Connection (PPTP) setup help refer to page 18. Cancel Prev Next For Username / Password Connection (L2TP) setup help refer to page 19. For Static IP Address Connection setup help refer to page 21. Select your connection type and click Next to continue. D-Link DIR-809 User Manual...
Page 22 Cancel Prev Next Address: If you choose Dynamic IP or Static IP as the Address Mode, enter your PPTP Server IP address: PPTP Server IP Enter the PPTP Server IP address provided by your ISP. Address: D-Link DIR-809 User Manual...
Page 23 Enter the L2TP Subnet Mask provided by your ISP. Verify Password : DNS SETTINGS Mask: Primary DNS Address : Secondary DNS Address : (optional) L2TP Gateway IP Enter the L2TP Gateway IP Address provided by your ISP. Cancel Prev Next Address: D-Link DIR-809 User Manual...
Page 24 DNS SETTINGS Primary DNS Enter the primary DNS server IP addresses. Server: Secondary DNS Enter the secondary DNS server IP addresses. Server: Click Next and proceed to Step 2 - Configure Your Wi-Fi Security on page 22. D-Link DIR-809 User Manual...
Page 25 DNS SETTINGS Primary DNS Enter the primary DNS server IP addresses. Server: Secondary DNS Enter the secondary DNS server IP addresses. Server: Click Next and proceed to Step 2 - Configure Your Wi-Fi Security on page 22. D-Link DIR-809 User Manual...
Page 26 STEP 3: SET YOUR PASSWORD STEP 3: SET YOUR PASSWORD By default, your new D-Link Router does not have a password configured for administrator access to the Web-based configuration pages. To secure your new networking device, please set and verify a password below: Enter a new administration password.
Page 27 Wi-Fi Network Name(SSID) 5GHz : Your_5GHz_Network Wi-Fi Password A_Str0ng_P@ssWord! Cancel Prev Next Congratulations, your device has been successfully configured. The router will reboot and LOGIN Login to the router : display the login page. User Name : Admin Password : Login D-Link DIR-809 User Manual...
Page 28: Configuration
NETWORK SETTINGS INTERNET CONNECTION SETUP WIZARD IPV6 If you would like to utilize our easy to use Web-based Wizard to assist you in connecting your new D-Link Systems Router to the Internet, click on the button below. DEVICE MODE Internet Connection Setup Wizard Note:Before launching the wizard, please make sure you have followed all steps outlined in the Quick Installation Guide included in the package.
Page 29: Web Ui Table Of Contents
WI-FI PROTECTED SETUP ADVANCED NETWORK GUEST ZONE IPV6 FIREWALL IPV6 ROUTING DIR-809 SETUP To return to this Web UI Table of Contents page, simply click the D-Link logo on the top INTERNET INTERNET CONNECTION right of each page. D-Link DIR-809 User Manual...
Page 30: Setup
NETWORK SETTINGS INTERNET CONNECTION SETUP WIZARD IPV6 If you would like to utilize our easy to use Web-based Wizard to assist you in connecting your new D-Link Systems Router to the Internet, click on the button below. DEVICE MODE Internet Connection Setup Wizard Note:Before launching the wizard, please make sure you have followed all steps outlined in the Quick Installation Guide included in the package.
Page 31: Internet
If you wish to modify or configure the device settings manually, click the Manual Internet Connection Setup. INTERNET CONNECTION SETUP WIZARD If you would like to utilize our easy to use Web-based Wizard to assist you in connecting your new D-Link Systems Router to the Internet, click on the button below. MANUAL INTERNET CONNECTION OPTION...
Page 32: Internet Connection Setup Wizard
This Internet Connection Setup Wizard will guide you through a step-by-step process to WELCOME TO THE D-LINK INTERNET CONNECTION SETUP WIZARD This wizard will guide you through a step-by-step process to configure your new D-Link router and connect to the configure your new D-Link router and connect to the Internet.
Page 33 DHCP CONNECTION (DYNAMIC IP ADDRESS) To set up this connection, please make sure that you are connected to the D-Link Router with the PC that was originally connected to your broadband connection. If you are, then click the Clone MAC button to copy your computer’s MAC Address to the D-Link Router.
Page 34 Next Cancel Connect Click Next to continue. SETUP COMPLETE! SETUP COMPLETE! The Internet Connection Setup Wizard has completed. Click the Connect button to save your settings. Click Connect to finish the setup. Prev Next Cancel Connect D-Link DIR-809 User Manual...
Page 35 Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Verify Password: Enter the password provided by your ISP one more time. DNS SETTINGS Primary DNS Enter the primary DNS server IP addresses. Server: D-Link DIR-809 User Manual...
Page 36 Next Cancel Connect Click Next to continue. SETUP COMPLETE! SETUP COMPLETE! The Internet Connection Setup Wizard has completed. Click the Connect button to save your settings. Click Connect to finish the setup. Prev Next Cancel Connect D-Link DIR-809 User Manual...
Page 37 Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Verify Password: Enter the password provided by your ISP one more time. DNS SETTINGS Primary DNS Enter the primary DNS server IP addresses. Server: D-Link DIR-809 User Manual...
Page 38 Next Cancel Connect Click Next to continue. SETUP COMPLETE! SETUP COMPLETE! The Internet Connection Setup Wizard has completed. Click the Connect button to save your settings. Click Connect to finish the setup. Prev Next Cancel Connect D-Link DIR-809 User Manual...
Page 39 Enter the secondary DNS server IP addresses. Server : Click Next to continue. SETUP COMPLETE! SETUP COMPLETE! The Internet Connection Setup Wizard has completed. Click the Connect button to save your settings. Click Connect to finish the setup. Prev Next Cancel Connect D-Link DIR-809 User Manual...
Page 40: Manual Internet Connection Setup
For PPPoE (Username / Password) setup help refer to page 39. For PPTP (Username / Password) setup help refer to page 41. For L2TP (Username / Password) setup help refer to page 43. For DS-Lite setup help refer to page 45. D-Link DIR-809 User Manual...
Page 41 1500 it manually or click Clone Your PC’s MAC Address. MAC Address : Clone Your PC’s MAC Address When you have finished configuring your Internet connection, click the Save Settings Save Settings Don’t Save Settings button. D-Link DIR-809 User Manual...
Page 42 1500 it manually or click Clone Your PC’s MAC Address. MAC Address : Clone Your PC’s MAC Address When you have finished configuring your Internet connection, click the Save Settings Save Settings Don’t Save Settings button. D-Link DIR-809 User Manual...
Page 43 DNS Mode: Select either Receive DNS from ISP or Enter DNS Manually. If you choose Enter DNS Manually as the DNS Mode, enter your DNS information: Primary DNS Enter the primary DNS server IP addresses. Server: D-Link DIR-809 User Manual...
Page 44 DNS Mode : ž Receive DNS from ISP š Enter DNS Manually Primary DNS Server : Secondary DNS Server : (optional) MTU : 1492 MAC Address : Clone Your PC’s MAC Address Save Settings Don’t Save Settings D-Link DIR-809 User Manual...
Page 45 Select either AlwaysOn, On Demand, or Manual. You may create a schedule by clicking New Schedule. Refer to Schedules on page 116 for more information. If you choose Manual as the Reconnect Mode, enter the Maximum Idle Time: D-Link DIR-809 User Manual...
Page 46 New Schedule š On Demand š Manual Maximum Idle Time : (minutes) Primary DNS Server : Secondary DNS Server : (optional) MTU : 1492 MAC Address : Clone Your PC’s MAC Address Save Settings Don’t Save Settings D-Link DIR-809 User Manual...
Page 47 Select either AlwaysOn, On Demand, or Manual. You may create a schedule by clicking New Schedule. Refer to Schedules on page 116 for more information. If you choose Manual as the Reconnect Mode, enter the Maximum Idle Time: D-Link DIR-809 User Manual...
Page 48 New Schedule š On Demand š Manual Maximum Idle Time : (minutes) Primary DNS Server : Secondary DNS Server : (optional) MTU : 1492 MAC Address : Clone Your PC’s MAC Address Save Settings Don’t Save Settings D-Link DIR-809 User Manual...
Page 49 IPv6 WAN Default Gateway : IPv6 WAN Default Your WAN IPv6 default gateway address is listed here. Save Settings Don’t Save Settings Gateway: When you have finished configuring your Internet connection, click the Save Settings button. D-Link DIR-809 User Manual...
Page 50: Wireless Settings
If your wireless network is already set up with Wi-Fi Protected Setup, manual configuration of the wireless network will destroy the MANUAL WIRELESS CONNECTION SETUP existing wireless network. If you would like to configure the wireless settings of your new D-Link Systems Router manually, then click on the Manual Wireless Network Setup button below.
Page 51: Wireless Connection Setup Wizard
Wireless Connection Setup Wizard This section describes the Wireless Connection Setup Wizard. STEP 1: WELCOME TO THE D-LINK WIRELESS SECURITY SETUP WIZARD STEP 1: WELCOME TO THE D-LINK WIRELESS SECURITY SETUP WIZARD Give your network a name, using up to 32 characters.
Page 52 A_Str0ng_P@ssWord! Security Password: Note: You will need to enter the same password as keys in this step into your wireless clients in order to enable proper wireless communication. Click Next to continue. Prev Next Cancel Save D-Link DIR-809 User Manual...
Page 53 Pre-Shared Key : A_Str0ng_P@ssWord! Wireless Band : 5GHz Band Wireless Network Name (SSID) : Your_5GHz_Network Security Mode : Auto (WPA or WPA2) - Personal Cipher Type: TKIP and AES Pre-Shared Key : A_Str0ng_P@ssWord! Prev Next Cancel Save D-Link DIR-809 User Manual...
Page 54: Add Wireless Device With Wps
‘virtual’ WPS button. Prev Next Cancel Connect Manual: Choose this option to see the currently configured wireless networking settings to enter on your wireless client. Choose your configuration type and refer to the following pages. D-Link DIR-809 User Manual...
Page 55 Press the WPS button or enter the WPS PIN on the client device which you wish to add to Remain time in second: 120 Adding wireless device: Started your DIR-809’s network. The WPS process is only active for 120 seconds. Prev Next...
Page 56 2.4 Ghz Frequency SSID: Your_2.4GHz_Network Security Mode: WPA2-PSK Cipher Type: AES -PIN (Personal Identification Number) Pre-shared Key: adc058dce7893caf98ca91 5 Ghz Frequency SSID: Your_5GHz_Network Security Mode: None Prev Next Cancel Wireless Status D-Link DIR-809 User Manual...
Page 57: Manual Wireless Connection Setup
Wireless Band: 2.4 GHz or 5 GHz Use this section to configure the wireless settings for your D-Link router. Please note that changes made in this section may also need to be duplicated on your wireless client. To protect your privacy you can configure wireless security features. Securing your wireless network is important as it is used to protect the integrity of the information being transmitted.
Page 58 Visibility Status : ž Visible š Invisible WIRELESS SECURITY MODE WIRELESS SECURITY MODE Security Mode : None ▼ Refer to Wireless Security Mode on page 55 for more information on configuring your WPA-Personal WPA-Enterprise wireless network’s security. D-Link DIR-809 User Manual...
Page 59: Wireless Security Mode
WEP Key 1 : are 64 bit (10 hex digits) or 128 bit (26 hex digits). Authentication: Select either Both or Shared Key. WEP Key 1: Enter a wireless key to use on your wireless network. D-Link DIR-809 User Manual...
Page 60 Enter a wireless key to use on your wireless network. RADIUS server Port: RADIUS server Shared Secret: Address: RADIUS server Port: Enter your RADIUS server’s port number. RADIUS server Enter your RADIUS server’s shared secret. Shared Secret: D-Link DIR-809 User Manual...
Page 61: Network Settings
Note: If you statically (manually) assign IP addresses to your computers Save Settings Don’t Save Settings or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. D-Link DIR-809 User Manual...
Page 62 Enable Host Name IP Address The currently defined DHCP Reservations are listed here. Enable: Enable or disable this DHCP Reservation rule. Host Name: The host name for this rule. IP Address: The DHCP IP address reservation. D-Link DIR-809 User Manual...
Page 63 This section displays all of the currently connected DHCP cclients. The Host Name, IP address, Save Settings Don’t Save Settings MAC Address, and expiration time of each client is displayed in the table. Click Save Settings when you are finished. D-Link DIR-809 User Manual...
Page 64: Ipv6
IPV6 INTERNET CONNECTION SETUP WIZARD If you would like to utilize our easy to use Web-based Wizard to assist you in connecting your new D-Link Systems Router to the IPv6 Internet, click on the button below.
Page 65: Ipv6 Internet Connection Setup Wizard
WELCOME TO THE D-LINK IPV6 INTERNET CONNECTION SETUP WIZARD This wizard will guide you through a step-by-step process to configure your new D-Link router and connect to the IPv6 connection which uses PPPoE, Static IP, or 6rd. Click Next to begin.
Page 66 Click Next to continue. SETUP COMPLETE! SETUP COMPLETE! The IPv6 Internet Connection Setup Wizard has completed. Click the Connect button to save your settings and reboot the router. Click Connect to finish the setup. Prev Next Cancel Connect D-Link DIR-809 User Manual...
Page 67 Click Next to continue. SETUP COMPLETE! SETUP COMPLETE! The IPv6 Internet Connection Setup Wizard has completed. Click the Connect button to save your settings and reboot the router. Click Connect to finish the setup. Prev Next Cancel Connect D-Link DIR-809 User Manual...
Page 68 Click Next to continue. SETUP COMPLETE! SETUP COMPLETE! The IPv6 Internet Connection Setup Wizard has completed. Click the Connect button to save your settings and reboot the router. Click Connect to finish the setup. Prev Next Cancel Connect D-Link DIR-809 User Manual...
Page 69: Ipv6 Local Connectivity Settings
Don’t Save Settings Current ULA The current ULA Prefix is displayed here. Prefix: LAN IPv6 ULA: The current LAN IPv6 ULA is displayed here. When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-809 User Manual...
Page 70: Manual Ipv6 Internet Connection Setup
For IPv6 in an IPv4 Tunnel refer to page 74. For 6to4 refer to page 77. For 6rd refer to page 79. For Local Connectivity Only refer to page 81. When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-809 User Manual...
Page 71 LAN IPv6 Address Settings Stateful DHCPv6 Router Advertisement Lifetime : (minutes) LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. Save Settings Don’t Save Settings LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: D-Link DIR-809 User Manual...
Page 72 IPv6 Address Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range(End): Router Enter the IPv6 address lifetime (in seconds). Advertisement Lifetime: When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-809 User Manual...
Page 73 LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. SLAAC+Stateless DHCP Stateful DHCPv6 Router Advertisement Lifetime : (minutes) LAN IPv6 Link- Displays the router’s LAN link-local address. Save Settings Don’t Save Settings Local Address: D-Link DIR-809 User Manual...
Page 74 Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range(End): Router The currently defined router advertisement lifetime is displayed. Advertisement Lifetime: When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-809 User Manual...
Page 75 LAN. MTU Size: Enter the MTU size. Enable Automatic IPv6 address assignment : Enable Automatic DHCP-PD in LAN : Autoconfiguration Type : SLAAC+RDNSS ▼ SLAAC+Stateless DHCP Stateful DHCPv6 Router Advertisement Lifetime : (minutes) D-Link DIR-809 User Manual...
Page 76 If you chose Static IP as the Address Mode, or disabled DHCP-PD, enter your LAN IPv6 Address: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: D-Link DIR-809 User Manual...
Page 77 IPv6 Address Range (End) : Range(End): Router Advertisement LIfetime : (minutes) Save Settings Don’t Save Settings Router The currently defined router advertisement lifetime is displayed. Advertisement Lifetime: When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-809 User Manual...
Page 78 Use this section to setup IPv6 Autoconfiguration to assign IP addresses to the computers on your network. You can also enable DHCP-PD to delegate prefixes for routers in your LAN. Enable Automatic IPv6 address assignment : Enable Automatic DHCP-PD in LAN : Autoconfiguration Type : SLAAC+RDNSS ▼ SLAAC+Stateless DHCP Stateful DHCPv6 Router Advertisement Lifetime : (minutes) D-Link DIR-809 User Manual...
Page 79 Check this box to enable DHCP-PD. Save Settings Don’t Save Settings LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. Not available if DHCP-PD is enabled. LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: D-Link DIR-809 User Manual...
Page 80 IPv6 Address Range (End) : Range(End): Router Advertisement LIfetime : (minutes) Save Settings Don’t Save Settings Router The currently defined router advertisement lifetime is displayed. Advertisement Lifetime: When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-809 User Manual...
Page 81 SLAAC+Stateless DHCP Stateful DHCPv6 LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. Router Advertisement Lifetime : (minutes) Save Settings Don’t Save Settings LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: D-Link DIR-809 User Manual...
Page 82 IPv6 Address Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range(End): Router Enter the IPv6 address lifetime (in seconds). Advertisement Lifetime: When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-809 User Manual...
Page 83 Stateful DHCPv6 Router Advertisement Lifetime : (minutes) Secondary DNS Enter the secondary DNS server address. Save Settings Don’t Save Settings Address: LAN IPV6 ADDRESS SETTINGS LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. D-Link DIR-809 User Manual...
Page 84 IPv6 Address Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range(End): Router Enter the IPv6 address lifetime (in seconds). Advertisement Lifetime: When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-809 User Manual...
Page 85 Use this section to configure the internal network settings of your router. LAN IPv6 Link-Local Address : XXXX:XXXX:XXXX:XXXX / 64 When you have finished configuring your IPv6 connection, click the Save Settings button. LAN IPv6 Unique Local Address : ffff::fff:ffff:ffff:1234 /64 Save Settings Don’t Save Settings D-Link DIR-809 User Manual...
Page 86: Device Mode
Device Mode DIR-809 WIRELESS MODE Wireless Mode: You may set your DIR-809 to operate in Wireless Router mode or in Repeater mode. The device will reboot if the wirelessmode is changed. DIR-809 Enable Band: If Repeator mode is chosen, then choose to enable the 2.4 GHz band or the 5 GHz band.
Page 87: Repeater Mode
Section 3 - Configuration Repeater Mode This section will show you how to configure or change the default settings for your DIR-809 using the web-based configuration utility in Repeater Mode. Repeater Mode is explained in Repeater Mode on page 9. The functions in repeater mode are otherwise identical to those described in router mode.
Page 88: 2.4G/5G Repeater
Finish you may lose access to the gateway. You can access it either by going to dlinkrouter.local in a browser or by connecting to its newly assigned IP address. Click Finish to complete the wizard. D-Link DIR-809 User Manual...
Page 89: Advanced
WI-FI PROTECTED SETUP ADVANCED NETWORK GUEST ZONE IPV6 FIREWALL IPV6 ROUTING DIR-809 SETUP To return to the Web UI Table of Contents page, simply click the D-Link logo on the top right INTERNET INTERNET CONNECTION of each page. D-Link DIR-809 User Manual...
Page 90: Virtual Server
<< button to quickly insert a device’s IP address. Private Port: Enter the LAN port number. Inbound Filter: You may set the traffic filter to Allow All or Block All traffic. Click the Save Settings button when you are finished. D-Link DIR-809 User Manual...
Page 91: Port Forwarding
<< button to quickly insert a device’s IP address. UDP: Enter the UDP port number to forward. Inbound Filter: You may set the traffic filter to Allow All or Block All traffic. Click the Save Settings button when you are finished. D-Link DIR-809 User Manual...
Page 92: Application Rules
Select TCP, UDP, or All. Schedule: Select the schedule from the drop-down menu. The default is Always. Refer to Schedules on page 116 for more information on creating new schedules. Click the Save Settings button when you are finished. D-Link DIR-809 User Manual...
Page 93: Qos Engine
QOS SETTINGS Use this section to configure D-Link's QoS Engine powered by QoS Engine Technology. This QoS Engine improves your online gaming experience by ensuring that your game traffic is prioritized over other network traffic, such as FTP or Web.For best performance, use Enable QoS: Enable or disable QoS.
Page 94 QOS SETTINGS Use this section to configure D-Link's QoS Engine powered by QoS Engine Technology. This QoS Engine improves your online gaming experience by ensuring that your game traffic is prioritized over other network traffic, such as FTP or Web.For best performance, use Select the protocol to apply the rule to: TCP, UDP, or All.
Page 95: Network Filter
Don’t Save Settings Schedule: Select the schedule from the drop-down menu. The default is Always. Refer to Schedules on page 116 for more information on creating new schedules. Click the Save Settings button when you are finished. D-Link DIR-809 User Manual...
Page 96: Inbound Filter
0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255 Cancel INBOUND FILTER RULES LIST INBOUND FILTER RULES LIST The currently defined Inbound Filter rules are listed here. Name Action Remote IP Range Click the Save Settings button when you are finished. D-Link DIR-809 User Manual...
Page 97: Access Control
Add Policy POLICY TABLE Enable Policy Machine Filtering Logged Schedule POLICY TABLE Save Settings Don’t Save Settings The currently defined access control policies are listed in this table. Click the Save Settings button when you are finished. D-Link DIR-809 User Manual...
Page 98: Add Policy
Computer Name dropdown Clone Your PC’s MAC Address menu to quickly select a computer. The IP address is automatically Cancel populated. Machine Prev Next Save Cancel D-Link DIR-809 User Manual...
Page 99 Apply Web Filter : Apply Advanced Port Filters : Apply Web Filter: Check this box to enable Web Access Logging. Prev Next Save Cancel Apply Advanced Check this box to enable port filtering. Port Filters: Click Next to continue. D-Link DIR-809 User Manual...
Page 100 Enable or disable Web Access logging. You may view the web access Web Access Logging : ž Disabled š Enabled log from the Status > Logs section of the web configuration utility. Logging: Prev Next Save Cancel Click Save to finish. D-Link DIR-809 User Manual...
Page 101: Website Filter
DENY computers access to ONLY these sites Clear the list below... Website URL/ Enter website URL/Domains in each box. Website URL/Domain Domain: Click the Save Settings button when you are finished. Save Settings Don’t Save Settings D-Link DIR-809 User Manual...
Page 102: Firewall Settings
DHCP reservation to ensure that the machine always receives the same address from the DHCP server. Use the Computer Name dropdown menu and the << button to quickly select a device. The IP address is automatically populated. D-Link DIR-809 User Manual...
Page 103 This ALG may interfere with the operation of such devices. If Save Settings Don’t Save Settings you are having trouble making VoIP calls, try turning this ALG off. Click the Save Settings button when you are finished. D-Link DIR-809 User Manual...
Page 104: Routing
Enter the gateway IP address. WAN(172.17.5.x) ▼ Netmask Gateway Metric: Enter the metric value between 1-255. Save Settings Don’t Save Settings Interface: Select the Interface from the drop-down menu. Click the Save Settings button when you are finished. D-Link DIR-809 User Manual...
Page 105: Advanced Wireless
Check this box to enable user isolation. User isolation forces wireless clients to communicate with each other through the access point. WMM Enable: Enable or Disable Wi-Fi MultiMedia QoS. Click the Save Settings button when you are finished. D-Link DIR-809 User Manual...
Page 106: Wi-Fi Protected Setup
Connect your Click this button to launch the WPS Add Device Wizard. Refer to Add Wireless Device: Wireless Device with WPS on page 50 for more information. Click the Save Settings button when you are finished. D-Link DIR-809 User Manual...
Page 107: Advanced Network
Enable to allow IPv4 multicast traffic to pass through the router from Streams: the Internet. IPV6 MULTICAST STREAMS Enable IPv6 Enable to allow IPv6 multicast traffic to pass through the router from Multicast Streams: the Internet. Click the Save Settings button when you are finished. D-Link DIR-809 User Manual...
Page 108: Guest Zone
Select a wireless security encryption option. The options are None, WEP, WPA-Personal, and WPA-Enterprise. Using WPA is recommended. Refer to Wireless Security Mode on page 55 for more information. Click the Save Settings button when you are finished. D-Link DIR-809 User Manual...
Page 109: Ipv6 Firewall
Enter the source IP address and specify the prefix length for the rule. PrefixLength: Select the protocol to apply the rule to, either ALL, TCP, UDP, or ICMP. Protocol: Select the destination interface, WAN or LAN, from the drop down Destination Interface: menu. D-Link DIR-809 User Manual...
Page 110 Turn IPv6 Filtering ON and ALLOW rules listed Turn IPv6 Filtering ON and DENY rules listed Name Schedule Always ▼ IP Address /PrefixLength Interface Protocol Source ▼ ▼ IP Address /PrefixLength Interface Port Range Dest ▼ Save Settings Don’t Save Settings D-Link DIR-809 User Manual...
Page 111: Ipv6 Routing
Enter the metric value between 1-255. NULL ▼ Save Settings Don’t Save Settings Interface: Select the Interface from the drop-down menu. Gateway: Enter the gateway IPv6 address. Click the Save Settings button when you are finished. D-Link DIR-809 User Manual...
Page 112: Tools
Details : Allow All Save Settings Don’t Save Settings DIR-809 SETUP To return to this Web UI Table of Contents page, simply click the D-Link logo on the top INTERNET INTERNET CONNECTION right of each page. D-Link DIR-809 User Manual...
Page 113: Admin
Enter the port number you wish to use to access the DIR-809’s web Port: configuration utility. Example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DIR-809 and 8080 is the port used for the web management interface. Note: If you enabled HTTPS Server and wish to access the router remotely and securely, you may enter https:// at the beginning of the address.
Page 114: Time
DST End ▼ ▼ ▼ 2 am ▼ Dates: AUTOMATIC TIME AND DATE CONFIGURATION Automatically synchronize with D-Link’s Internet time server NTP Server Used : ntp1.dlink.com ▼ SET THE TIME AND DATE MANUALLY AUTOMATIC TIME AND DATE CONFIGURATION Year 2016 Month ▼...
Page 115: Syslog
Enter the IP address of the syslog server. Use the Computer Name Save Settings Don’t Save Settings Address: dropdown menu and the << button to quickly select a device. The IP address is automatically populated. Click the Save Settings button when you are finished. D-Link DIR-809 User Manual...
Page 116: System
Save button above. Reboot The Device: Click this button to reboot the device. Clear Language If the device is of other language than English, clicking this button Pack: to convert the router’s language back to English. D-Link DIR-809 User Manual...
Page 117: Firmware
Choose File No file chosen Upload Clear Config: Check this box to clear the current settings of your DIR-809 once the firmware update is applied. LANGUAGE PACK UPGRADE Upload: You can change the language of the web UI by uploading language packs.
Page 118: Dynamic Dns
Click Dynamic DNS on the navigation menu to configure the Dynamic Domain Name Server (DDNS) client. DDNS makes accessing your network from the Internet easier by providing you with an easy to use web address. Owners of D-Link routers can use the dlinkdns service. DIR-809...
Page 119: System Check
Host Name or IP Address : Ping Address: and click Ping. IPV6 PING TEST Host Name or IPv6 Address : Ping PING RESULT Result here PING RESULT The results of the test are displayed in this dialog box. D-Link DIR-809 User Manual...
Page 120: Schedules
Click the Add button when you are satisfied with your new schedule. SCHEDULE RULES LIST The currently added rules are displayed in this table. You may edit or delete a rule by clicking on its corresponding Edit or Delete buttons. D-Link DIR-809 User Manual...
Page 121: Status
Connection Up Time : 0 Day 0 Hour 0 Min 0 Sec MAC Address : ff:ff:ff:ff:ff:ff IP Address : 192.168.0.1 DIR-809 SETUP To return to this Web UI Table of Contents page, simply click the D-Link logo on the top INTERNET INTERNET CONNECTION right of each page. D-Link DIR-809 User Manual...
Page 122: Device Info
Section 3 - Configuration Device Info Click Device Info to see current information about the DIR-809. This pages displays LAN, WAN (Internet), and Wireless information. GENERAL DIR-809 STATUS The DIR-809’s currently set time and firmware are displayed here. DEVICE INFO...
Page 123 WIRELESS LAN2 WIRELESS LAN2 Wireless Radio : Enabled MAC Address : ff:ff:ff:ff:ff:ff The DIR-809’s currently configured 5 GHz wireless network settings are displayed here. 802.11 Mode : Mixed 802.11ac, 802.11n and 802.11a Channel Width : 20/40/80MHz Channel : 161 Network Name (SSID) : Your_5GHz_Network...
Page 124: Logs
To change the levl of information to view and then click the Save LOG FILES Settings button. First Page Last Page Previous Next Clear Time Message Sep 19 09:15:05 2016 User Admin login success LOG FILES Click the navigation buttons to view the log file. D-Link DIR-809 User Manual...
Page 125: Statistics
Section 3 - Configuration Statistics Click Statistics on the navigation menu to view statistics on the amount of traffic which has passed through the DIR-809’s interfaces. Click the Refresh Statistics button to view the latest numbers. DIR-809 STATUS STATISTICS TRAFFIC STATISTICS TRAFFIC STATISTICS Traffic Statistics displays Receive and Transmit packets passing through the device.
Page 126: Internet Sessions
Internet connections. This page helps to diagnose connectivity issues. Click the Refresh button to view the latest information. DIR-809 STATUS INTERNET SESSIONS INTERNET SESSIONS INTERNET SESSIONS This page displays Source and Destination sessions passing through the device. Refresh Protocol Internet State Time Out 192.168.0.100 54674 192.168.0.1 D-Link DIR-809 User Manual...
Page 127: Wireless
View the wireless clients that are connected to the router. (A client might linger in the list for a few minutes after an unexpected disconnect.) NUMBER OF WIRELESS CLIENTS - 2.4GHZ BAND : 0 MAC Address IP Address Mode Rate(Mbps) Signal (%) NUMBER OF WIRELESS CLIENTS - 5GHZ BAND : 0 MAC Address IP Address Mode Rate(Mbps) Signal (%) D-Link DIR-809 User Manual...
Page 128: Routing
Click Routing to view the currently configured IPv4 routing table. DIR-809 STATUS ROUTING ROUTING ROUTING Routing Table This page displays the routing details configured for your router. ROUTING TABLE Destination Gateway Genmask Metric Iface Creator 192.168.0.100 0.0.0.0 255.255.255.0 eth1 D-Link DIR-809 User Manual...
Page 129: Ipv6
The current IPv6 Link-Local address is listed here. IPv6 Default Gateway : NONE LAN IPv6 Link-Local Address : ffff::fff:fff:ffff:ffff Address: LAN IPV6 COMPUTERS IPv6 Address Name(if any) LAN IPV6 COMPUTERS The currently connected IPv6 computers are listed in this table. D-Link DIR-809 User Manual...
Page 130: Ipv6 Routing
Click IPv6 Routing to view the currently configured IPv6 routing table. DIR-809 STATUS IPV6 ROUTING IPV6 ROUTING IPV6 ROUTING This page displays IPV6 routing details configured for your router. IPV6 ROUTING TABLE Destination IP Gateway Metric Interface fe800000000000000000000000 000000000000000000000000 000000/64 00000000 D-Link DIR-809 User Manual...
Page 131: Support
• Network Filter • Inbound Filter • Access Control • Website filter • Firewall Settings • Routing • Advanced Wireless • Wi-Fi Protected Setup • Advanced Network • Guest Zone • IPv6 Firewall • IPv6 Routing D-Link DIR-809 User Manual...
Page 132: Connect A Wireless Client To Your Router
Blu-ray DVD players, wireless printers, and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-809 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS.
Page 133: Windows® 10
Windows® 10 When connecting to the DIR-809 wirelessly for the first time, you will need to input the wireless network name (SSID) and Wi- Fi password (security key) of the device you are connecting to. If your product has a Wi-Fi configuration card, you can find the default network name and Wi-Fi password here.
Page 134 Your computer will now automatically connect to this wireless network when it is detected. You can also use Wi-Fi Protected Setup (WPS) to connect to the router. Press the WPS button on your D-Link device and you will be automatically connected. D-Link DIR-809 User Manual...
Page 135: Windows® 8
Wireless Icon Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DIR-809 User Manual...
Page 136 WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DIR-809 User Manual...
Page 137: Windows® 7
If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link DIR-809 User Manual...
Page 138 If you get a good signal but cannot access the Internet, check your TCP/ IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-809 User Manual...
Page 139: Wps
Section 4 - Connecting to a Wireless Network The WPS feature of the DIR-809 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu.
Page 140 Section 4 - Connecting to a Wireless Network 3. Double-click the DIR-809. DIR-809 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next. D-Link DIR-809 User Manual...
Page 141 Section 4 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-809 User Manual...
Page 142 7. The following window appears while the DIR-809 is being configured. Wait for the configuration to complete. 8. The following window informs you that WPS on the DIR-809 has been set up successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future.
Page 143: Windows Vista
(displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-809 User Manual...
Page 144: Wpa/Wpa2
1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DIR-809 User Manual...
Page 145 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-809 User Manual...
Page 146: Troubleshooting
1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.11.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
Page 147 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.
Page 148 • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-809 User Manual...
Page 149 • To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-809 User Manual...
Page 150: Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
Page 151: What Is Wireless
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work? Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B.
Page 152 The wireless connection in public places is usually called “hotspots”. Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries, restaurants, and convention centers.
Page 153: Tips
Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up. D-Link DIR-809 User Manual...
Page 154: Wireless Modes
An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-hoc network contains only clients, such as laptops with wireless USB adapters. All the adapters must be in Ad-hoc mode to communicate. D-Link DIR-809 User Manual...
Page 155: Networking Basics
Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Page 156: Statically Assign An Ip Address
Set Primary DNS the same as the LAN IP address of your router (192.168.11.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-809 User Manual...
Page 157: Wireless Security
Appendix B - Networking Basics Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-809 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) •...
Page 158: Technical Specifications
Environmental factors will adversely affect wireless signal range. 2 Frequency Range varies depending on country’s regulation. 3 The DIR-809 does not include 5.47-5.725 GHz in some regions. D-Link DIR-809 User Manual...
Page 159: Regulatory Information
Potencia máxima de Salida Frequenza/e Potenza max. Output Frequentie(s) Max. Output Power 5.15 – 5.25 GHz 200 mW 5.25 – 5.35 GHz 200 mW 5.47 – 5.725 GHz 2.4 G 2.4 – 2.4835 GHz 100 mW D-Link DIR-809 User Manual...
Page 160 υλικολογισμικό του προϊόντος είναι διαθέσιμα για λήψη από τη σελίδα του προϊόντος στην τοποθεσία www. dlink.com. Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux Français [French] directives 2014/53/UE.Le texte complet de la déclaration de conformité de l'UE et le icroprogramme du produit sont disponibles au téléchargement sur la page des produits à...
Page 161 2014/53/EU. Pełen tekst deklaracji zgodności UE oraz oprogramowanie sprzętowe do produktu można pobrać na stronie produktu w witrynie www.dlink.com. Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade Português [Portuguese] com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do firmware...
Page 162 Appendix D - Regulatory Statements Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun Íslenska [Icelandic] 2014/53/EB. Sækja má ESB-samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www.
Page 163 Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU. • Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link DIR-809 User Manual...
Page 164 5 Ghz dentro de la UE. • Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link DIR-809 User Manual...
Page 165 Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU. • Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link DIR-809 User Manual...
Page 166 • Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen. • Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link DIR-809 User Manual...
Page 167 • Mantenga el producto alejado de los radiadores y de otras fuentes de calor. • Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link DIR-809 User Manual...
Page 168 • Houd het product uit de buurt van radiators en andere warmtebronnen. • U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link DIR-809 User Manual...
Page 169 D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
Page 170 D-Link et l’environnement Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.
Page 171 D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.
Page 172 D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
Page 173 D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.
Page 174 D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.
Page 175 D-Link och miljön På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.

D-Link DIR-809 User Manual

Quick Links

Related Manuals for D-Link DIR-809

Summary of Contents for D-Link DIR-809

Table of Contents