Related Manuals for Mitsubishi Electric GOT1000 GT11 Series
Summary of Contents for Mitsubishi Electric GOT1000 GT11 Series
- Page 1 START START START START- - - - UP GUIDE UP GUIDE UP GUIDE UP GUIDE GT11 Series to FX Note: This document is for reference only. For detailed settings and safety information refer to the respective product manual.
- Page 2 Ver. A GOT1000 Startup Guide GT11 Series-to-FX Connection Overview: This document provides a simple guide and reference for setting up the GT11 Series Graphic Operation Terminal (GOT) hardware and firmware for use with an FX Series PLC. Hardware Introduction: The GT11 Series are 5.7”, 320 x 240 dot resolution, three built-in communication channel GOT1000 Series touch panel interfaces.
- Page 3 communication channel of the FX (RS-422 8-pin Mini-DIN or RS-232C 9-pin D-sub). The cable names and details for each case are illustrated below: Connection to an RS-422 FX communication channel Cable Name Length FX Comm. Equipment GT01-C10R4-8P Programming Port GT01-C30R4-8P FX3U-422-BD GT01-C100R4-8P FX2N-422-BD...
- Page 4 Example Connection Diagram: The following is an example of an FX-to-GOT-to-PC connection, where the blue lines indicate data communication and the red line indicates power from the FX3U 24V DC service power supply. FX3U- GT1155-QTBD 422-BD (Front) FX3U-16MR-ES/UL GT1155-QTBD (Back) GT01-C100R4-8P Firmware Updates: To make sure the GT11 Series GOT...
- Page 5 “Communicate with GOT” window. Go to the “Communication configuration” tab and select “USB”. With the GOT power ON, use the “Test” button to verify that the PC and GOT can communicate properly. Go to the “OS Install -> GOT” tab in the “Communicate with GOT”...
- Page 6 Manual References: Refer to the following manuals for more detailed explanations. For any further questions, please contact your local Mitsubishi Product Provider. GT11 User’s Manual (JY997D17501) GT11 General Description (JY997D17401) GOT1000 Series Connection Manual 1/3 (SH(NA)-080532ENG) - Sections 3.1.5, 3.1.6, 3.1.7, 3.2.1, 3.2.2 Note: This document is for reference only.