Toro 30534N Operator's Manual page 8

1. Warning—read the Operator's Manual.
2. Warning—do not operate this machine unless you are trained. 7. Warning—lock the parking brake, stop the engine and remove
3. Warning—wear the seat belt when seated in the operator's
position.
4. Cutting/dismemberment hazard of hand or foot—remove the
ignition key and read the instructions before servicing or
performing maintenance.
5. Warning—wear hearing protection.
117-3233
4 Wheel drive models
1. Read the Operator's Manual for information on fuses.
2. 4 wheel steer solenoid—7.5 amp
3. PTO enable, 4 wheel steer lamp, deck lift, deck float—7.5
amp
4. Glow indicator, fuel run solenoid, diagnostic light, start—7.5
amp
5. Headlights, deck actuator, power take–off—10 amp
6. Lights—15 amp
7. Operator presence switch—10 amp
8. Power point, lights—15 amp
9. Engine—10 amp
117-3273
6. Thrown object hazard—keep bystanders a safe distance from
the machine.
the ignition key before leaving the machine.
8. Tipping hazard—lower the cutting unit when driving down
slopes; slow machine before turning, do not turn at high
speeds
9. Cutting hazard of hand or foot—stay away from moving parts;
keep all guards in place.
1. Read the Operator's Manual for information on fuses.
2. Differential lockout—10 amp
3. Engine—10 amp
4. Lights, power point—15 amp
5. Power switch, engine ignition—10 amp
6. Lights—15 amp
7. Operator presence switch—10 amp
8. Computer—2 amp
9. Headlights, deck actuator—10 amp
8
117-3232
2 Wheel drive models