Rps - Bosch B8512G Operation Manual

158
en | B92x/B91x Actions menu
26.4

RPS

Use the RPS menu for connection to Remote Programming Software
(RPS). Your security company uses RPS to configure and service your
security system. RPS is intended for use by professional or licensed
installers only.
26.4.1 Answer
Use the Answer option to answer the phone (pick up the phone line) to
connect to RPS.
Using the Answer menu option to answer an incoming call from RPS:
1. Open the Main Menu.
2. Use NEXT to go to the Actions menu option, and press ENTER, or
simply press [3].
3. Use NEXT to go to the RPS menu option, and press ENTER, or
simply press [4].
4. Press [1] or ENTER to reset the sensors with the Answer option.
5. Enter your passcode and press ENTER. The keypad shows RPS is
connecting.... and then returns to idle text.
2019.06 | 07 | F.01U.307.371
Control Panels
Bosch Security Systems B.V.