Table of Contents
Advertisement
Replacing the computer access panel
Place the panel on the computer then slide it back (1) and tighten the thumbscrew (2) to secure the
panel in place.
Changing from desktop to tower configuration
The computer can be used in a tower orientation with an optional tower stand that can be purchased
from HP.
1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as a USB flash drive, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
long as the system is plugged into an active AC outlet. You must disconnect the power cord to
avoid damage to the internal components of the computer.
Regardless of the power-on state, voltage is always present on the system board as
Replacing the computer access panel
7
Advertisement
Table of Contents
