Table of Contents
Related Manuals for Philips VR620CAT
Summary of Contents for Philips VR620CAT
- Page 1 VR620CAT Video Cassette Recorder Hookup Pages...
-
Page 2: Hookups Without A Cable Box/Direct Broadcast System
Cable Box or a Direct Broadcast System, please see pages eight-nine. If you have a Stereo TV, please see page 10. After you hook up the VCR, go to page 11 to turn on the VCR. Disconnect the antenna or cable from your TV. - Page 3 Connect the supplied black RF coaxial cable to the OUT Jack on the back of the VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on type (supplied) or screw-on type of coaxial cable, whichever you prefer.)
-
Page 4: Hookups With A Cable Box/Direct Broadcast System
You may not program channels at the VCR. You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable Box/DBS output channel (channel 03 or 04); set the CH3/CH4 switch on the back of the VCR to the same channel. -
Page 5: Recording One Channel/Watching Another
VCR’s CH3/CH4 switch. Set the TV to the Cable Box/DBS output channel (03 or 04). Then, with the VCR in VCR position (the VCR light will appear on the display panel), use the CH(annel) o/p buttons to select the channel you want to record at the VCR. Start the recording. -
Page 6: Hookups With A Stereo Tv
If your TV’s AUDIO IN jacks are not color coded, connect the red (right) AUDIO OUT jack of the VCR to the right channel AUDIO IN jack on the TV. Connect the white (left) AUDIO OUT jack of the VCR to the left channel AUDIO IN jack on the TV. -
Page 7: Front Panel
Use to watch TV (changing channels at the TV) or to watch one program while record- ing another. When the VCR light does not appear on the display panel, the VCR is in TV position. STOP/EJECT Button Press once to stop the tape. When playback is stopped, press to eject the tape. -
Page 8: Rear Panel
VIDEO OUT Jack Connect a video cable going to the VIDEO IN Jack of a camcorder, another VCR, or an audio-visual system (monitor, laser disc player, digital video disc player, etc.) here. Details are on pages 34 and 40. VIDEO IN Jack... -
Page 9: Helpful Hints
VCR 1 will play your tape. Put a prerecorded tape in VCR 1. VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR light will appear on the display panel.