Advertisement
Notes:
When using the machine for the rst time, in order to ensure the sanity and safety of water, the tap
needs turning on one hour and then turning o , standing for two hours, and purify waters for 1 hour.
1. First, open the three-way ball valve and turn
the water storage tank ball value o , then
make the power on, the machine starts by
default.
Open the water
inlet ball value
First use instruction
1 . The installation master shall install, ush and
debug the whole machine according to the
maintenance procedures.
Install
----- ------- - --------- - -- ------- ------- ---------- ---------- ---------------- ------- - --------- - -- ------- ------- ---------- ------
Starting up
1. Open the three-way ball valve, and then plug
in.
Shutdown
1. Close the three-way ball valve, and then unplug the power cord.
Make the power on
Debug
Flush
2. Close the water faucet and wait for 60
seconds, then check the concentrated water
of machine stops or not.
2. Users can use the water puri er normally.
2. The whole machine is powered on by default,
and the indicator of power and lter life will be
turn on.
9
Concentrated water
Seconds
Advertisement
