Macintosh; For Usb Interface Users; 10.2.4 Or Greater; For Mac Os ® 9.1 To 9.2 - Brother DCP-340CW Quick Setup Manual

STEP2
Installing the Driver & Software

For USB Interface Users

For Mac OS
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on page 4-9.
Note
For Mac OS
®
Mac OS X 10.2.4 or greater. (For the latest
information for Mac OS
http://solutions.brother.com)
1
Disconnect the machine from the power socket
and from your computer, if you already
connected an interface cable.
2
Turn on your Macintosh
3
Put the supplied CD-ROM into your CD-ROM
drive.
4
Double-click the Start Here OSX icon to install
the drivers and MFL-Pro Suite. If the language
screen appears, choose your language.
22
®
X 10.2.4 or greater
®
X 10.2.0 to 10.2.3 users, upgrade to
®
X, visit
®
.
5
Click MFL-Pro Suite to install.
6
Choose Local Connection, and then click
Next. Follow the on-screen instructions, and
restart your Macintosh
7
After the DeviceSelector window appears
connect the USB interface cable to your
Macintosh and then to the machine.
Note
The DeviceSelector window will not appear if you
have connected a USB interface cable to the
machine before restarting your Macintosh
you are overwriting a previously installed version
of the Brother Software. If you encounter this
problem continue with the installation but skip step
13. You should choose your Brother machine
from the Model pop-up menu in the main screen of
ControlCenter2. For details, see chapter 10 in the
Software User's Guide on CD-ROM.
®

Macintosh

®
.
®
or if