Troubleshooting (In Operation); Appendix; Contents Of The Getting Started Manual; Replacing Square-Button Labels - Yamaha NUAGE FADER Ncs500-FD Operation Manual

Control surface
Hide thumbs Also See for NUAGE FADER Ncs500-FD:
Table of Contents

Advertisement

Troubleshooting
(in operation)
A connection cannot be
established with Pro Tools.
• Ensure that the steps described in "Settings for Pro
Tools"
(page
26) have been completed.
The [Fader] motors do not operate.
• Ensure that the [Fader] motors are turned on. To do so,
check the settings from "Motor"
FADER Setup.
The [Channel name displays] turn
off unexpectedly.
• The [Channel name displays] turn off automatically after
a certain period of inactivity in order to protect them.
You can set this period using "OLED Off Time"
(page
23) in NUAGE FADER Setup.
[REC] from the CHANNEL STRIP
section cannot be turned on.
• "Input Routing" must be set in order to turn on [REC] for
"Audio" channels.
The [Faders] do not move in
response to channel scrolling
using the [Touch slider bar].
• The function allowing the [Faders] to reflect [Touch
slider bar] actions is turned off. Turn on "Follow Slider
Scroll"
(page
23) in NUAGE FADER Setup.
(page
23) in NUAGE

Appendix

Contents of the Getting
Started Manual
PRECAUTIONS
NOTICE
Information
Introduction
A Message from the Development Team
Included Accessories
Items to Have Ready
How to Read the Manual
Setup
Overall Process
Setting and Connecting
Setting up the Power Supply
Installing TOOLS for NUAGE
Configuring the Workgroup on NUAGE
Troubleshooting (in setting up)
Appendix
Contents of the Operation Manual
Firmware Updates
Adjusting the Touch Sensitivity
Specifying the Brightness
Calibrating Fader Motion or Position
Resetting to the Factory Default Condition
Dimensions
Specifications
Replacing Square-button
Labels
The labels from the square buttons can easily be
replaced. These replacements can be made by cutting a
transparent or semi-transparent sheet into 10 x 10 mm
pieces. To install, simply remove the button's cap, swap
out the current label, and replace the cap.
NUAGE FADER Operation Manual

Troubleshooting (in operation)

25

Advertisement

Table of Contents
loading

Table of Contents