Setting the white balance manually
1
Select [Ó] and then press [MENU/SET].
2
Aim the camera at a sheet of white paper etc. so that the
frame in the centre is filled by the white object only and then
press [MENU/SET].
3
After setting, select [Ò].
Note
•
The white balance setting is memorised even if the camera is turned off. (However, the white
balance setting for a scene mode returns to [AWB] when the scene mode is changed.)
∫ Finely adjusting the white balance [
Use this to set the white balance manually.
•
Set the white balance to [V]/[Ð]/[î]/[Ñ]/[Ò].
3
1
[ È ] several times until [WB ADJUST.] appears
Press
and then press
2 [RED]: Press when the hue is bluish.
1 [BLUE]:Press when the hue is reddish.
•
Select [0] to return to the original white balance.
2
Press [MENU/SET] to finish.
•
You can also press the shutter button halfway to finish.
•
The white balance icon on the screen turns red or blue.
Note
•
You can finely adjust the white balance independently for each white balance item.
•
The white balance fine adjustment setting is reflected in the picture when using the flash.
•
The white balance fine adjustment setting is memorised even if the camera is turned off.
•
The white balance fine adjustment level in [Ò] returns to [0] when you reset the white balance
using [Ó].
•
In the [UNDERWATER] in scene mode, the white balance is fixed at [AWB], but it can be finely
adjusted.
Advanced (Recording pictures)
2
1
/
to adjust the white balance.
]
- 83 -