Pioneer DMH-ZF8550BT Operation Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Stereo Receiver
  5. DMH-ZF8550BT
  6. Operation manual
Pioneer DMH-ZF8550BT Operation Manual

Pioneer DMH-ZF8550BT Operation Manual

Rds av receiver
Hide thumbs Also See for DMH-ZF8550BT:
Table of Contents

Advertisement

Quick Links

DMH-ZF8550BT
RDS AV RECEIVER
Operation Manual

Advertisement

Table of Contents
loading

Related Manuals for Pioneer DMH-ZF8550BT

Summary of Contents for Pioneer DMH-ZF8550BT

  • Page 1 DMH-ZF8550BT RDS AV RECEIVER Operation Manual...

  • Page 2: Table Of Contents

    Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference.
  • Page 3 Displaying the setting screen ........................74 System settings ..............................74 Theme settings..............................85 Audio settings ..............................87 Video settings ..............................91 Communication settings ..........................92 ■ Favourite menu ................. 94 ■ Other functions................. 95 ■ Appendix ................... 97 - 3 -...

  • Page 4: Precaution

    • If you notice smoke, a strange noise or odour from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorised Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.
  • Page 5 To ensure safe driving WARNING • LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE HANDBRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.
  • Page 6 • To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred. • Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.
  • Page 7 Protecting the LCD panel and screen • Do not expose the LCD screen to direct sunlight when this product is not used. This may result in LCD screen malfunction due to the resulting high temperatures. • When using a mobile phone, keep the aerial of the mobile phone away from the LCD screen to prevent disruption of the video in the form of spots, coloured stripes, etc.

  • Page 8: Parts And Controls

    Parts and controls Main unit Touch to display the home menu screen. Touch and hold to power off. To power back on, touch any button. NOTE When the home menu screen is displayed, touch to display the previously used AV source screen. Touch to activate the voice recognition mode such as Siri when the iPhone is connected to the unit via Bluetooth or USB.

  • Page 9: Basic Operation

    Basic operation Starting up the unit Start the engine to boot up the system. The [Select Program Language] screen appears. NOTE From the second time on, the screen shown will differ depending on the previous conditions. Select the language. Touch The [Location Setting] screen appears.
  • Page 10 Switching the speaker mode To change the speaker mode, you need to restore this product to the default settings. Restore the default setting (page 96). Using the touch panel You can operate this product by touching the keys on the screen directly with your fingers.
  • Page 11 Operating the time bar You can change the playback point by dragging the key. The playback time corresponding to the position of the key is displayed while dragging the key. Operating the on-screen keyboard Displays the characters that are entered. Enters the characters in the text box.
  • Page 12 Home menu screen 12:48 6/10 Abcdefgh Your Location Abcdef - Abcdefghi Apple CarPlay Android Auto Phone Settings Widget (page 15) Touch to see the selected source/application. Customising the widget (page 15) When you finish customising, touch Favourite source/application area Touch to see the selected source/application. Customising the home menu screen (page 12) The following items can be customised.
  • Page 13 • This function is available only when you stop your vehicle in a safe place and apply the handbrake. • The [Apple CarPlay] icon and the [Android Auto] icon cannot be removed from the favourite source/ application area. ▶Changing the home menu screen layout Touch and hold the favourite source/application area.
  • Page 14 Favourite radio stations screen Favourites Abcdefgh Abcdefgh Abcdefgh XX Radio XX Radio XX Radio Favourite radio stations Touch to make changes to the selected radio station. List of favourite radio stations Touch to select the favourite radio station from the list screen (page 14). Updates the favourite radio stations.
  • Page 15 Notification Notification displays the notifications from the connected iPhone or smartphone (Android) registered on CarAVAssist. NOTE To enable this function, establish a Bluetooth connection between this product and an iPhone or a smartphone with CarAVAssist installed (page 31). For iPhone, connection is made with Bluetooth Low Energy.
  • Page 16 12:48 6/10 Abcdefgh Your Location Abcdef - Abcdefghi Abcdefg Abcdefghijk Abcdefg Widget area To rearrange the widgets, drag them to the desired locations. To remove a widget, drag the widget to Available source/application lists for the widgets Flick left/right to switch between widget lists. Adjusts the size of the widgets Touch a corner of the selected widget and drag it to adjust the size.

  • Page 17: Bluetooth

    Bluetooth® Bluetooth connection Turn on the Bluetooth function on the device. Display the connected Bluetooth device list screen on the device. Touch then swipe left on the screen. Touch then Touch [Connection]. Touch The unit starts to search for available devices, then displays them in the device list. Touch in the list.
  • Page 18 • Two mobile phones can be connected to this product at the same time (page 18). Bluetooth settings Touch then swipe left on the screen. Touch then Touch [Bluetooth Settings]. CAUTION Never turn this product off and disconnect the device while the Bluetooth setting operation is being processed.
  • Page 19 registered devices are already connected, you can connect the remaining third device to use the audio function only from the switch devices key on the audio source screen. • The icon for the mobile phone currently being used is displayed on the phone menu screen.
  • Page 20 The following items are displayed. • Name of the current mobile phone • List number of the current mobile phone • Reception status of the current mobile phone • Battery status of the current mobile phone If you connect two mobile phones to this product at the same time, you can switch between the mobile phones using the switch devices key.
  • Page 21 Using the preset dial lists ▶Registering a phone number You can easily store up to six phone numbers per device as presets. Touch then swipe left on the screen. Touch [Phone]. Touch On the [Phone Book] screen, touch the desired name to display the contact’s phone number.
  • Page 22 NOTE When two phones are connected at the same time, if an incoming call is received on the second phone while you are talking on the first phone, the dial confirmation screen for the second phone will be displayed. Voice recognition function (for iPhone) By connecting your iPhone to this product, you can use the voice recognition function (Siri Eyes Free Mode) on this product.
  • Page 23 Setting the private mode During a conversation, you can switch to private mode (talk directly on your mobile phone). Touch to turn private mode on or off. NOTES • If two mobile phones are connected to this product and the first phone is set to private mode, you can receive incoming calls on the second phone while maintaining the call in progress on the first phone.
  • Page 24 • The registered name will appear if the phone number is already registered in the phone book. When multiple names are registered for the same phone number, the names are displayed in the same order as in the phone book. ▶The received call and dialled number histories •...
  • Page 25 Touch [Bluetooth Audio]. The Bluetooth audio playback screen appears. Basic operation Track number indicator Switches between playback and pause. Skips files forwards or backwards. Sets a repeat play range. Switches between random and normal file playback order. Selects a file or folder from the list to playback. NOTE This function is available only when the AVRCP version of the Bluetooth device is 1.4 or higher.

  • Page 26: Wi-Fi

    Wi-Fi® By connecting this unit to a Wi-Fi network, you can display the weather information on the unit and use Apple CarPlay or Android Auto via the wireless connection. See the following chapters for the procedure on how to use Apple CarPlay or Android Auto wirelessly.
  • Page 27 Touch [Hotspot setting]. Access point setting screen Available network SSIDs Touch to connect selected network. Automatic connection status Touch to switch between the network automatically or manually. Network connection priority Drag the network upwards to prioritise the connection by touching Searches for existing networks.
  • Page 28 Connects Wi-Fi network. Touch to select desired network then enter the password if required. If you want to connect to a network that is not listed on the screen, touch [Other (Add network)] and enter the required information. Searches again for existing networks. Wi-Fi settings Touch then swipe left on the screen.
  • Page 29 Using the CarAVAssist app and wireless data from your connected mobile device, you can use the weather function that require an internet connection. – Compatible Pioneer receiver, compatible mobile device with CarAVAssist app, and wireless services data plan required. – NOTE: This function uses data from the mobile device that you connect to this unit.
  • Page 30 Follow the message displayed on the connected iPhone or smartphone to make a Wi-Fi connection with this unit. Receiver Internet Access connection is successfully established. NOTE If Receiver Internet Access connection is not established, try the followings: • Activate the Wi-Fi setting on your mobile device. •...

  • Page 31: Caravassist

    CarAVAssist CarAVAssist is an application that allows you to configure and transfer various settings of this unit. You can also update this unit's firmware wirelessly by using this application. Before you start WARNING Do not attempt to operate the application while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the application.
  • Page 32 For details, refer to “Help” in the CarAVAssist application. Transferring the data Connect your iPhone or smartphone with CarAVAssist installed on it to this product via Bluetooth (page 17). Touch then swipe left on the screen. Touch Open CarAVAssist on the connected iPhone or smartphone then touch the connection button on the top menu screen of the application.
  • Page 33 NOTES • This product will reset automatically after the firmware update is completed if the update is successful. • If an error message appears on the screen, touch the display and perform the above steps again. - 33 -...

  • Page 34: Source/Application

    Source/application Supported source and application You can play or use the following sources or application with this product. • Radio (page 37) • USB (page 42) The following sources or applications can be played back or used by connecting an auxiliary device.
  • Page 35 Source list Touch to see the selected source. Selecting [Power OFF] will turn off most of the functions on this unit. The [Power OFF] mode is released in the following cases: • Footage from the rear view camera is input when the vehicle is in reverse. •...
  • Page 36 Settings (page 74) and Favourite menu (page 94) Selects or customises the equaliser curve (page 89). Hands-free phoning (page 19) Selecting a source/an application NOTE [Source OFF] is only available for AV sources. Source/application selection screen Touch then swipe left on the screen. Touch the source/application icon.

  • Page 37: Radio

    Radio Starting procedure Touch then swipe left on the screen. Touch [Radio]. The radio screen appears. Basic operation Radio screen 12 : 48 6/10 Radio Abcdefghi Abcdefghi Abcdefghi 999.99 Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key. Displays the preset channel list.
  • Page 38 Performs BSM (best stations memory) function (page 38). Manual tuning Seek tuning or non stop seek tuning Releasing the key in a few seconds skips to the nearest station from the current frequency. Keep holding the key for long seconds to perform non stop seek tuning.
  • Page 39 To cancel the storage process Touch [Cancel]. Registering your favourite radio stations Register your favourite radio stations to quickly receive these stations by a single touch on the favourite radio stations screen (page 13). Tune the radio to the station you want to register. Touch Touch ( ) in the widget area.
  • Page 40 Menu Item Description [Local] Local seek tuning allows you to only tune into [Off] radio stations with sufficiently strong signals. FM: [Level1] [Level2] [Level3] [Level4] NOTES AM/MW/LW: [Level1] [Level2] • The FM [Level4] (AM/MW/LW [Level2]) setting allows reception of only stations with the strongest signals. •...
  • Page 41 *1 This setting is available only when the source is off. *2 This function is available only when you receive the FM band. - 41 -...

  • Page 42: Usb

    Plugging/unplugging a USB storage device You can play audio, video, or still image files stored in a USB storage device. Plugging a USB storage device Pull out the plug from the USB port of the USB cable. Plug a USB storage device into the USB cable. NOTES •...
  • Page 43 Touch [USB]. Playback is performed in order of folder numbers. Folders are skipped if they contain no playable files. Basic operation You can set the screen size for the video and image files (page 95). Audio source Audio source screen 1 12 : 48 6/10 Abcdefghijk...
  • Page 44 Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the right to the left. Switches the following media file types. [Music]: Audio files [Video]: Video files [Photo]: Image files Selects a file from the list. Touch a file on the list to playback.
  • Page 45 ▶Selecting a file using Music Browse mode You can select files to play back using the category list if the files contain tag information. NOTE This function is available for the USB storage device only. Touch to create a database. Music Browse mode will be available after the database has been created.
  • Page 46 Switches between playback and pause. Performs fast reverse or fast forwards. Touch again to change the playback speed. Stops playback. Touch again to start from the beginning next time. Performs frame-by-frame playback. Performs slow-motion playback. Sets a repeat play range for all files/the current folder/the current file. Switches the audio language.
  • Page 47 Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Switches between playback and pause. Skips files forwards or backwards. Selects the previous folder or the next folder. Saves the current images as the wallpaper. Touch the following items to overwrite the image.
  • Page 48 Selects a file from the list. Touch a file on the list to playback. Touching a folder on the list shows its contents. You can play a file on the list by touching it. - 48 -...

  • Page 49: Iphone

    iPhone Connect your iPhone to this product to play music in your iPhone or listen to the radio on Apple Music. NOTE Before connecting your iPhone, make sure that Apple CarPlay is enabled (page 57). Connecting your iPhone When connecting an iPhone to this product, the settings are automatically configured according to the device to be connected.
  • Page 50 Basic operation Audio source 12 : 48 6/10 Apple CarPlay Abcdefghijk Abcdefghi Abcdef 9999/9999 9999’99” Displays the link search screen. Select a song from the list related to the song currently playing. If you touch the artwork, the list of songs in the album is displayed. NOTE This function is not available while playing Apple Music radio.
  • Page 51 Selects a song from the list. Touch the category then the title of the list to playback of the selected list. TIPS • If you use English as the system language, the alphabet search function is available. Touch the initial search bar to use this function. •...
  • Page 52 12 : 48 6/10 Apple CarPlay Abcdefghijk Abcdefghi Abcdef 9999’99” Switches between playback and pause. Displays the radio pop-up menu for Apple Music. • Touch [Play More Like This] to play back songs similar to the current song. • Touch [Play Less Like This] to set it not to play back the current song again. •...

  • Page 53: Smartphone (Androidâ„¢)

    Smartphone (Android™) Connect your smartphone to this product to play music in your smartphone. NOTE Before connecting your Android device, make sure that Android Auto is enabled (page 61). Connecting your Android device Wired connection Connect an Android Auto compatible device to this product via USB. Touch then swipe left on the screen.
  • Page 54 Basic operation 12 : 48 6/10 Android Auto Abcdefghijk Abcdefghi Abcdef Switches between playback and pause. Skips files forwards or backwards. - 54 -...

  • Page 55: Weblink

    Using WebLink Important • Pioneer is not responsible for content or functions accessed via WebLink, which are the responsibility of the application and content providers. • Availability of non-Pioneer content and services, including apps and connectivity, may change or discontinue without notice.
  • Page 56 For smartphone (Android) users WebLink Supported Smartphone Operating Systems Android 9.0 or higher NOTES • [USB MTP] must be set to [Off] to use WebLink (page 75). • The video playback capability depends on the connected Android device. Unlock your smartphone and connect it to this product via USB. Touch then swipe left on the screen.

  • Page 57: Apple Carplay

    • Apple CarPlay allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
  • Page 58 Touch then The communication setting screen appears. Touch [Driving Position]. Select the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure Wired connection Connect an Apple CarPlay compatible device to this unit via USB. Touch the Apple CarPlay icon.
  • Page 59 The available devices appear on the list. Touch the desired device on the screen. If the device that you want to connect does not appear, touch on the screen again. You can also start Apple CarPlay with the desired device by opening the Bluetooth or Apple CarPlay setting menu while displaying the device search or device list screen.
  • Page 60 Touch to mute. Touch again to cancel mute. NOTE The mute function is not available while the enhanced Siri function is used. Touch [+]/[-] to adjust the guidance volume. Displays the main sound volume. To adjust the main sound volume, touch VOL (+/-) on the unit or touch [+]/[-].

  • Page 61: Android Auto

    • Android Auto allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
  • Page 62 Setting the driving position To achieve optimum usability of Android Auto, set the driving position setting correctly according to the vehicle. The setting will be applied the next time an Android Auto compatible device is connected to this product. Touch then swipe left on the screen.
  • Page 63 The available devices appear on the list. Touch the desired device on the screen. If the device that you want to connect does not appear, touch on the screen again. Touch [Yes] to pair with the device. Perform the pairing operation by operating the device. The unit configures the connection then starts the application.
  • Page 64 NOTE The volume menu is displayed for four seconds. If the menu disappears, touch VOL (+/-) again. The menu reappears. Setting the auto-launch function If this function is set to on, the Android Auto screen is displayed automatically when an Android Auto compatible device is connected to this unit.

  • Page 65: Weather

    Weather Display the current temperature and daily or hourly forecast in your current location. The weather function uses a location service to determine your current location. Using weather Important • To use the weather function, you need to connect this unit to the Internet via a Wi-Fi network (page 26). •...

  • Page 66: Aux

    You can display the video image output by the device connected to video input. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the handbrake. NOTE A Mini-jack AV cable (sold separately) is required for connection.
  • Page 67 Hides the touch panel keys. To display the keys again, touch anywhere on the screen. You can set the screen size for the video image (page 95). Switches between the video input and audio input. - 67 -...

  • Page 68: External Component

    External component Camera view You can display the video image output using the device connected to the back camera input or 2nd camera input. For details, refer to the Quick start guide. Starting procedure Touch then swipe left on the screen. Touch [Camera View].

  • Page 69: Idatalink

    iDatalink™ (Available in Australia and New Zealand) Using iDatalink You can access the satellite radio source provided for the vehicle. The vehicle information and many OEM systems such as steering wheel controls, warning chimes, driver safety systems, and etc. can be displayed on this product by connecting the optional iDatalink adaptor.
  • Page 70 Find the device number (12 alphanumeric characters) on the label on the packaging of this product or on the product itself. Access the following website and follow the on-screen instructions to configure the desired firmware. https://www.idatalinkmaestro.com/en NOTE When the serial number input is required, input the device number of this product. Install the vehicle/head unit-specific firmware on your iDatalink Maestro module.
  • Page 71 Using the functions on [Car Sources] [Car Sources] is operated almost the same way as the built-in AV sources on this product is operated. For details on the operation, refer to the following relevant pages. • Operating via USB/iPhone (page 42) (page 49) •...
  • Page 72 Vehicle Information screen Climate screen Parking Assist screen - 72 -...
  • Page 73 Speed Radar Detector screen Displaying obstacle detection information CAUTION This function is intended solely to assist the driver’s vision. It does not detect all dangers and obstacles and is not a substitute for your attentiveness, judgement, and care while parking your vehicle. NOTE This function is only available for vehicles equipped with a parking sensor system.

  • Page 74: Settings

    Settings You can adjust various settings in the main menu. Displaying the setting screen Touch then swipe left on the screen. Touch Touch one of the following categories, then select the options. System settings (page 74) Theme settings (page 85) Audio settings (page 87) Video settings (page 91) Communication settings (page 92)
  • Page 75 Touch this key to switch the display between the rear view image and 2nd camera image. CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed. • Immediately verify whether the display changes to the rear view camera image when the gearstick is moved to REVERSE (R) from another position.
  • Page 76 • When the screen changes to full-screen rear view camera image during normal driving, switch to the opposite setting in [Camera Polarity]. • If you touch while the camera image is displayed, the displayed image turns off temporarily. Menu Item Description [Rear Viewing Camera Setting rear view camera activation.
  • Page 77 Menu Item Description [Parking Assist Guide Adjusting the guidelines by dragging or touching Adjust]* on the screen. Touch [Default] to reset the settings. CAUTION • When adjusting the guidelines, be sure to park the vehicle in a safe place and apply the handbrake. •...
  • Page 78 [Safe Mode] Menu Item Description [Safe Mode] Set to [Off] to enable operating some function that is [On] [Off] restricted while driving. [Demo Mode] Menu Item Description [Demo Mode] Setting the demo mode. [On] [Off] [System Language] Menu Item Description [System Language] Select the system language.
  • Page 79 • Depending on your vehicle, this function may not work properly. In this case, contact your dealer or an authorised PIONEER Service Station. • Please use a PIONEER wiring harness for each car model when [With Adapter] mode is engaged, otherwise select [W/o Adapter].
  • Page 80 [Clock Settings] Menu Item Description [Clock Settings] Setting or adjusting the following time and clock display. • Date display format: day-month-year, month-day-year, or year-month-day • Time display format: [12hour] or [24hour] • UTC (Universal Time Coordinated) time zone difference: [UTC-12h] to [UTC+14h] •...
  • Page 81 Menu Item Description [Dimmer Duration] Adjust the time that the dimmer is turned on or off by dragging the cursors or touching You can use this function when [Dimmer Trigger] is set to [Time]. TIPS • Each touch of moves the cursor backwards or forwards in the 15 minute width.
  • Page 82 * With some pictures, you cannot adjust [Hue] and [Colour]. NOTES • The adjustments of [Brightness], [Contrast], and [Dimmer] are stored separately when your vehicle's headlights are off (daytime) and on (nighttime). • [Brightness] and [Contrast] are switched automatically depending on the setting of [Dimmer Settings].
  • Page 83 Menu Item Description [Firmware Update] Update to the latest version of the firmware by using a USB storage device or wireless connection. To update the firmware via wireless connection, CarAVAssist is required. For details on performing the wireless update, refer to Updating the firmware wirelessly (page 32).
  • Page 84 Menu Item Description [3D Calibration Status] Check the sensor learning status, such as the degree of learning. You can also check the current sensor values and the total number of speed pulses. To delete the learned results stored in the sensor, follow the below instructions.

  • Page 85: Theme Settings

    [OEM Settings] Menu Item Description [OEM Settings] (page 73). [OEM Volume Settings] Menu Item Description [OEM Volume Settings] (page 73). [Terms of Use / Privacy] Menu Item Description [Terms of Use / Privacy] Select to accept or withdraw from the Internet Communication Service the Terms of Use and Privacy Policy.
  • Page 86 Menu Item Description Preset Display Select the desired preset background display. When the preset background display image with the icon (for the AV operation screen only) is selected, the colour changes to match the colour of the artwork image. (custom)*1 Displays the background display image imported from the USB storage device.

  • Page 87: Audio Settings

    Menu Item Description [Appearance] Switches the screen appearance to Light mode or Dark mode. (This setting is also applied to the screen of Apple CarPlay or Android Auto.) [Dimmer] Switches to the Light mode or the Dark mode automatically according to the [Dimmer Settings] (page 80).
  • Page 88 Menu Item Description [Loudness] Compensates for deficiencies in the low-frequency and [Off] [Low] [Mid] [High] high-frequency ranges at low volume. [Source Level Adjuster] Adjust the volume level of each source to prevent radical [-4] to [+4] changes in volume when switching between sources other than FM.
  • Page 89 Menu Item Description [Balance] Touch to adjust the left/right balance. NOTE This function is available when [Network Mode] is selected as the speaker mode, or when [Standard Mode] is selected as the speaker mode and [Subwoofer] is selected in [Rear Speaker Output]. [Time Alignment] Select or customise the time alignment settings to reflect [On] [Off]...
  • Page 90 Menu Item Description [Rear Speaker Output] Select the rear speaker output. [Rear] [Subwoofer] NOTE This function is available when [Standard Mode] is selected as the speaker mode and the source is off. [Mute Level] If an interruption caused by an audio signal occurs while Apple CarPlay or Android Auto is being used, select mute or attenuate the volume of the AV source and iPhone/ smartphone application.

  • Page 91: Video Settings

    Touch then Touch [Crossover] or [Subwoofer Settings]. Touch to switch the speaker. Drag the graph line to set the cutoff position. Drag the lowest point of the graph to set the cutoff slope. The following items can also be set. Switches the subwoofer phase between normal and reverse position.

  • Page 92: Communication Settings

    Menu Item Description [RSE] Select the suitable video signal setting when you connect [Auto] [PAL] [NTSC] this product to a rear monitor via iDatalink. [PAL-M] [PAL-N] [SECAM] Communication settings [Connection] Menu Item Description [Connection] Displaying a list of mobile devices that have been connected via Bluetooth or USB.
  • Page 93 [Select Wi-Fi] Menu Item Description [Select Wi-Fi] Select the following Wi-Fi mode. [Smartphone] Enable if you want to use this unit as an access point of the infrastructure mode network to connect your device to the unit wirelessly. [Hotspot] Enable if you want to connect this unit to a Wi-Fi network. [Off] Disable the Wi-Fi function.

  • Page 94: Favourite Menu

    Favourite menu Registering your favourite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the [Favourites] screen. NOTE Up to 12 menu items can be registered in the favourite menu. Creating a shortcut Touch then swipe left on the screen.

  • Page 95: Other Functions

    Other functions Setting the clock display You can set the time format, time zone, daylight saving, and the date format. However, the time and date are automatically adjusted by the GPS aerial and cannot be adjusted by the user. Touch the current time on the screen. Set the following items in the settings.
  • Page 96 Touch the desired mode. [Full] Displays images across the entire screen. NOTE Some images may not be displayed across the entire screen. [Zoom] Displays the images enlarging them vertically. [Normal] Displays images without changing the ratio. [Trimming] An image is displayed across the entire screen with the horizontal-to-vertical ratio left as is.

  • Page 97: Appendix

    – Correct the settings. solution to your problem cannot be found here, contact your dealer or the nearest The audio or video skips. authorised Pioneer service facility. → This product is not firmly secured. – Secure this product firmly. Common problems No sounds are produced.
  • Page 98 If the error persists, record the error message and contact your dealer or your nearest Pioneer service A black screen is displayed. → While operating an application, the centre. application was ended on the smartphone side.
  • Page 99 DRM. the engine is switched off/on, contact – Replace the USB storage device. your dealer or an authorised Pioneer Service Station for assistance. Incompatible USB → The connected USB storage device is Product overheat. System will be shut not supported by this product.
  • Page 100 If the error message is still displayed after – Update the iPhone version. performing the above action, please contact your dealer or an authorised Pioneer Service Station. Apple CarPlay Connection failed. → Communication failed and the system is trying to connect.
  • Page 101 USB storage device. contact your dealer or an authorised • It may not be possible to play some music Pioneer Service Station. files from USB because of file characteristics, file format, recorded Bluetooth pairing failed.
  • Page 102 • There may be a slight delay when starting USB storage device playback of audio files encoded with CODEC FORMAT MP3, WMA, image data. WAV, AAC, • Some USB storage devices connected to FLAC, DSD, AVI, this product may generate noise on the MPEG-PS, radio.
  • Page 103 Video files compatibility QUANTIZATION BIT RATE 8 bit/16 bit/24 • Files may not be played back properly bit/32 bit (int only) depending on the environment in which the file was created or on the contents of AAC compatibility the file. •...
  • Page 104 .mov word mark and logos are registered trademarks owned by Bluetooth SIG, Compatible video codec MPEG4, H.264, Inc. and any use of such marks by Pioneer H.263 Corporation is under license. Other trademarks Maximum resolution 1 920 × 1 080...
  • Page 105 other materials provided with the Dolby® distribution. – Neither the name of the Xiph.org Manufactured under license from Dolby Foundation nor the names of its Laboratories. Dolby, Dolby Audio and the contributors may be used to endorse or double-D symbol are trademarks of Dolby promote products derived from this Laboratories Licensing Corporation.
  • Page 106 MPEG-4. Several applications can be used to encode AAC files, but file formats • Pioneer accepts no responsibility for data and extensions differ depending on the lost from an iPhone, even if that data is application which is used to encode. This lost while using this product.
  • Page 107 compliance with safety and regulatory Use of the Apple CarPlay logo means standards. that a vehicle user interface meets Please note that the use of this Apple performance standards. Apple is accessory with an Apple product may not responsible for the operation of this affect wireless performance.
  • Page 108 Content application(s) or Using app-based service by its provider. connected content • Pioneer is not liable for any issues that may arise from incorrect or flawed app- based content. Important • The content and functionality of the...
  • Page 109 Notice regarding video Liquid crystal display (LCD) screen viewing • If the LCD screen is near the vent of an air Remember that use of this system for conditioner, make sure that air from the commercial or public viewing purposes air conditioner is not blowing on it.
  • Page 110 1 024 (Width) × 600 (Height) × 3 (RGB) dimmer and the image will no longer be Display method: visible. In that case, please consult your TFT Active matrix driving dealer or the nearest authorised Pioneer Colour system: Service Station. PAL/NTSC/PAL-M/PAL-N/SECAM compatible...
  • Page 111 Slope: Speaker level: -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 +10 dB to -24 dB (1 dB/step) dB/oct, -30 dB/oct, -36 dB/oct Phase: Normal/Reverse USB standard spec: Time alignment: USB 1.1, USB 2.0 full speed, USB 2.0 high 0 to 350 cm (1.4 cm/step) speed Speaker level: Max current supply: 1.5 A...
  • Page 112 Decode Size: FM tuner MAX: 936 (H) × 1 920 (W) Frequency range: MIN: 32 (H) × 32 (W) 87.5 MHz to 108 MHz <USB video> Usable sensitivity: H.264 video decoding format: 12 dBf (1.1 μV/75 Ω, mono, S/N: 30 dB) Base Line Profile, Main Profile, High Signal-to-noise ratio: Profile...
  • Page 113 +16.5 dBm Max (2.4 GHz) +17.5 dBm Max (5 GHz) GNSS receiver System: GPS L1C/Ac, SBAS L1C/A, GLONASS L1OF, Galileo E1B/C SPS (Standard Positioning Service) Reception system: 72 channel Multi-channel reception system Reception frequency: 1 575.42 MHz/1 602 MHz Sensitivity: -140 dBm (typ) Frequency: Approx.
  • Page 114 Pioneer High Fidelity Taiwan Co., Ltd. https://pioneer-india.in/ Pioneer India Electronics Pvt. Ltd. <Latin> https://pioneer-latin.com/ Pioneer International Latin America, S.A. http://www.pioneer-mexico.com.mx/ Pioneer Electronics de México S.A. de C.V. <Russia> https://www.pioneer-rus.ru/ Pioneer RUS Limited Liability Company © 2023 PIONEER CORPORATION <OPM_DMHZF8550BTGS_EG_A> GS...

Table of Contents