Logitech UE 3000 Getting Started

3000
Getting started with
Logitech® UE 3000
Wireless Headphones + Mic
快速入门
Logitech® UE 3000
无线耳机 + 麦克风
1
Charge your UE 3000 Wireless Headphones
为耳机充电
English 简体中文
要对耳机进行充电，请使用随附的 USB
To charge the headphones, plug the
included USB charging cable into your 充电连接线连接耳机和电脑（或可选的
headphones and computer (or an optional USB 充电器）。在耳机电量极低的情况
USB charger). When the headphone 下，完全充满电可能需要三个小时。充电
时无需停止使用耳机，因为在通话或聆听
battery is very low, a full charge can take
up to three hours. But you don't have to 音乐时仍然可以充电。
stop using the headphones because they
charge while you talk or listen to music.
3
2
Connect your UE 3000 Wireless Headphones
为UE3000无线耳机建立连接
USB
English
Connect to a Bluetooth® device
First Bluetooth pairing
1. Power on the Bluetooth device (e.g. MP3, mobile phone, smartphone or tablet) to be paired
with the headphones. Turn on Bluetooth for that device. (Refer to your Bluetooth device
documentation to complete these tasks.)
2. Press and hold the Multi-function button for six seconds to turn the headphones on. The
headphones enter pairing mode and the status light blinks rapidly.
3. In the Bluetooth device menu, select Logitech UE 3000 from the Bluetooth menu. If the
Bluetooth device requests a security code, PIN, or pass code, enter 0000.
4. When the headphone status light turns solid green, a Bluetooth connection is made.
English
Additional Bluetooth pairings
To pair up to 7 additional Bluetooth devices (for a total of 8):
1. Power off your headphones by pressing the Multi-function button for four seconds and in
the Bluetooth menu of your previously connected device, turn off the Bluetooth connection.
2. Power on the Bluetooth device (e.g. MP3, mobile phone, smartphone or tablet) to be paired
with the headphones. Turn on Bluetooth for that device. (Refer to your Bluetooth device
documentation to complete these tasks.)
3. Press for nine seconds the headphone Multi-function button. The headphone status light
blinks rapidly. The headphones enter pairing mode.
4. In the Bluetooth device menu, select Logitech UE 3000 from the Bluetooth menu. If the
Bluetooth device requests a security code, PIN, or pass code, enter 0000.
5. When the headphone status light turns solid green, a Bluetooth connection is made.
3000
Getting started with
Logitech® UE 3000
Wireless Headphones + Mic
快速入门
Logitech® UE 3000
无线耳机 + 麦克风
English
Product features
1. Adjustable headband
2. Multi-function button
(power on/off, pairing, play/pause,
answer/reject calls)
1
3. Volume up
4. Volume down
2
5. Sculpted ear pads
6. Noise-canceling microphone
3
7. Battery/wireless status light
8. Charging port
4
9. USB charging cable
5 7
简体中文
产品功能
8
6 1. 可调节头带
2. 多功能按钮 (开关、模式切换、播放/
暂停、接听/挂断电话)
3. 增大音量
4. 减小音量
5. 人体工学耳垫
6. 具备噪音消除功能的麦克风
7. 电量/无线连接状态指示灯
9
8. 充电端口
9. USB 充电连接线
简体中文
连接到蓝牙® 设备
首次蓝牙配对
1. 打开要与耳机配对的蓝牙设备（例如 MP3、移动电话、智能手机或平板电脑）的电源。开
启该设备的蓝牙。（请参考蓝牙设备说明书完成这些操作。）
2. 开启耳机电源：按住多功能按键6秒。状态指示灯开始快速闪烁，耳机进入配对状态。
3. 从蓝牙设备的蓝牙菜单中选择耳机。如果您的蓝牙设备要求安全码、PIN 或通行码，请输
入 0000。
4. 耳机状态指示灯变成稳定的绿灯后，即表示蓝牙连接成功。
简体中文
配对其他蓝牙设备
可另外配对多达7个蓝牙设备（共可配对8个）
1. 断开现有设备的蓝牙连接：
长按多功能按键4秒关闭耳机电源，并关闭现配对设备的蓝牙功能
2. 打开要与耳机配对的蓝牙设备（例如 MP3、移动电话、智能手机或平板电脑）的电源。开
启该设备的蓝牙。（请参考蓝牙设备说明书完成这些操作。）
3. 按住耳机多功能按钮 9 秒。耳机状态指示灯将快速闪烁。耳机开始配对。
4. 从蓝牙设备的蓝牙菜单中选择耳机。如果您的蓝牙设备要求安全码、PIN 或通行码，请输
入 0000。
5. 耳机状态指示灯变成稳定的绿灯后，即表示蓝牙连接成功。