Pioneer CD-VS33 Operation Manual page 14

Installation
6. Adjust the installation angle of the controller unit.
Adjust the angle for optimal ease of use.
7. Secure the controller unit firmly with the L-fixtures.
Tighten the screws fully.
Note:
• Be careful not to overtighten the screws or tighten them slanted. An expanded screw hole might
result, disabling attachment of the L-fixtures.
Installation using Velcro tape
Adhere the Velcro tape (hard) (provided) to the back of the controller unit, adhere the
Velcro tape (soft) to the installation location and then install.
Controller unit
13
Velcro tape
(hard)
Velcro tape
(soft)