Installing The Auxiliary Handle - Toro Flex-Force Power System 51833T Operator's Manual

2

Installing the Auxiliary Handle

Parts needed for this procedure:
1 Auxiliary handle assembly
1 Edger adjustment tool
Procedure
1. Separate the auxiliary handle from the handle plate by removing the 4 screws (A of
2. Line up the auxiliary handle with auxiliary handle plate on the edger handle (B of
3. Secure the auxiliary handle to the handle plate with the 4 screws previously removed (C of
using the provided Allen wrench.
Figure 4
10
Figure 4).
Figure 4).
Figure 4)
g333337