OVERVIEW
General Service Conditions
As shown in
Figure
PBX
Champ
Connector
REAR VIEW
5. General Service Conditions
The following service conditions apply to both a DSS/BLF and Add-On Module.
1.
A DSS/BLF and an Add-On Module can coexist on one circuit card.
port allocation on an ELC circuit card.
ELC
ADM
term
D
term
D
term
D
ADM
term
D
DSS/BLF
2.
DSS consoles, their associated D
to the same Inter Module Group.
CHAPTER 1
Page 6
Revision 1.0
1-4, the cable distance allowed includes the 25-pair installation cable.
25-Pair installation cable
Cable Distance between PBX and DSS
Figure 1-4 Cable Distance Definition
LV
7
6
5
4
3
2
No terminal can be wired to this port.
1
0
Figure 1-5 Example of Port Allocation on an ELC Card
term
s, and stations which are to be assigned to the DSS keys must belong
Station Wire
0.4 mm (.051 in) (26 AWG)
0.5 mm (.019 in) (24 AWG)
MDF
term
D
ND-70684 (E)
DSS Console
Rosette
Figure 1-5
illustrates an example of
term
D
term
D
term
D
DSS/BLF
ADM
ADM