Supporting Hdmi Cec Command - NEC E556 User Manual

Supporting HDMI CEC command

HDMI CEC command
name
One Touch Play
Remote Control Pass
Through
Power Status
System Information
System Standby
System Audio Control
Device OSD Name
Transfer
Routing Control
CEC is an abbreviation of Consumer Electronics Control.
NOTE:
• Depending on the connected device, sometimes the device does not work properly.
If HDMI CEC supporting devices are turned on, the
display that connected the devices by HDMI cable is also
turned on automatically then changed Input to HDMI.
If the display is turned on when HDMI CEC devices are
turned on, it changed input to HDMI.
The display's wireless remote control button operation
is functioning to HDMI CEC supporting devices. For
example, if turn on the display by wireless remote
control and press play back button, HDMI CEC
supporting devices will also be turn on and play back.
Connected HDMI CEC supporting devices obtains the
display's power status such as the display is in standby
mode or on.
This function obtains the information of a connected
HDMI CEC supporting device (CEC version, Physical
Address). In addition, this function copes with "Change
Language function".
If the language using at the display is changed, the
language at connected HDMI CEC supporting device is
changed to the same language that selected at the display.
As for the "Change Language function", it is necessary
that the connected HDMI CEC supporting device to
cope a multilanguage.
If turn off the display by wireless remote control supplied
with the display, HDMI CEC supporting devices are also
turned off at the same time. If turn off the display while
a HDMI CEC supporting device is recording, the device
is kept on. Please refer to the user's manual supplied
with the HDMI CEC supporting device for more detail.
The function sends digital audio signal through HDMI
cable. Please set audio amplifier between the display
and HDMI CEC supporting devices with HDMI cable.
The Volume button on the wireless remote control is
also controlling volume of the connected audio amplifier.
While this function is active, internal speaker or external
speaker connected to the display will be MUTE.
This function obtains the connected HDMI CEC
supporting device's name.
By selecting device name, HDMI CEC supporting
device input can be switched.
After selecting the device, wireless remote control
operation is functioning to the selected device.
English-40
Explanation