Step
Screw (quantity)
1
M2 × 3.5 mm, flat-head, nylon-coated (1)
Note: If the M.2 solid-state drive thermal pad is damaged during replacement, remove the M.2 solid-state
drive thermal pad as below and apply a new one on the system board.
1030 Wireless WAN card, bracket, and thermal pad (for selected models)
For access, remove this FRU:
• "1010 Base cover assembly" on page 60
Removal steps of the wireless WAN card and its bracket(if any)
• Type 1
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
63