Epson AcuLaser Color Station 8600 Quick Reference page 4

Error Messages
The following error messages will appear on the touch screen when an error has occurred in the copy station.
Copy system errors
Display on the control panel
System Error
Internal Error
Restart
System
System Error
Fatal Error
Restart
System
System Error
Paper Error
Press the Stop button
System Error
HDD Full
Press the Stop button
Details and Solution
Restart System.
(1) Turn off the scanner and
the printer.
(2) Wait for approximately
3 minutes, and then turn the
devices back on.
(3) If the same message
reappears, this may indicate
malfunctioning interface
boards.
In this case, contact your
dealer or the closest customer
support services for assistance.
A document that cannot be
scanned has been placed on
the scanner.
Press the y stop button, and
check the document type.
In the Collate mode, scanning
cannot be completed
because the optional Hard
Disk Unit is full.
Press the y stop button to
cancel the copy job.
Printer errors
Printer error messages are displayed on both the copy
station's touch screen and on the printer's LCD panel.
When an error occurs, see the section about error
messages in the EPSON AcuLaser Color Copy Station
8600 Reference Guide or in the printer's Quick Reference
guide, then try the solutions provided.
Scanner and calibration errors
For scanner or calibration errors, see the section about
error messages in the EPSON AcuLaser Color Copy
Station 8600 Reference Guide.
4
Printed in Japan 02.xx.xx