Mitsubishi Electric MVZ Series Service Manual page 43

4. Blower/Fan Assembly
Exercise caution when removing heavy parts.
1. Remove the Blower and Filter panel (along with
filter if installed) indicated in section 2.
2. Remove the (1 or 2) brackets that secure the
coil assembly.
3. Remove the door that covers the small enclosure
attached to the fan assembly (Fig.12).
Unplug the motor and route the wire harness out
of the enclosure.
4. Remove the (2) screws that secure the fan
assembly and slide out.
Fig. 11
Fig. 12
41