Philips 27B1U5601H User Manual page 8

3
Connecting to your PC
4
1 2 3
USB docking (USB C-C)
a-1
a-2
USB Type-C
USB hub (USB A-C)
a-1
a-2
a
USB Type-A
USBC1
1 Power Switch
AC power input
2
3 HDMI input
DisplayPort input
4
5 USBC1
6 USBC2 (DATA)
RJ45 input
7
AUDIO
OUT
10
USBC
6 8
11
(PD15W)
5 7 9 12
13
RJ45
1 2
c
a
b
USBC1
OR
1 2
c
b
OR
USBC2
OR
DisplayPort output
8
9 USB downstream
10 Audio (In/Out): audio out /
microphone in combo jack
or
USBC (Power supply up to 15W)
11
12 USB downstream/USB fast charger
13 Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back
of the display firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
USB
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
6. Remove the rubber plug when using
DP out connector.
4 USB C driver installation for RJ45
Before using the USB C docking display,
please ensure to install the USB C driver.
USB
You can go to Philips website support
page to download the "LAN Drivers".
Please follow the steps for the
installation:
1. Install the LAN driver that matches
your system.
2. Double click driver to install, and
follow Window's instructions to
proceed with installation.
3. It will show "success" when the
installation is finished.
4. You must reboot your computer
6