LG SHS36-D Owner's Manual
Speaker sound bar
Hide thumbs
Also See for SHS36-D:
- Owner's manual (28 pages) ,
- Owner's manual (25 pages) ,
- Owner's manual (24 pages)
Related Manuals for LG SHS36-D
Summary of Contents for LG SHS36-D
- Page 1 OWNER’S MANUAL Speaker Sound Bar Please read this manual carefully before operating your set and retain it for future reference. HLS36W (HLS36W, SHS36-D) P/NO : MFL67240448 HLS36W-NB_DPANLLK_ENG_0448.indd 1 2011-07-13 3:51:38...
-
Page 2: Safety Information
Getting Started Safety Information Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only CAUTION that appliance and has no additional outlets or branch circuits. Check the specification page of this RISK OF ELECTRIC SHOCK owner’s manual to be certain. Do not overload wall DO NOT OPEN outlets. Overloaded wall outlets, loose or damaged CAUTION: TO REDUCE THE RISK OF ELECTRIC wall outlets, extension cords, frayed power cords, or SHOCK DO NOT REMOVE COVER (OR BACK) NO damaged or cracked wire insulation are dangerous. USER-SERVICEABLE PARTS INSIDE REFER SERVICING Any of these conditions could result in electric TO QUALIFIED SERVICE PERSONNEL. shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage This lightning flash with or deterioration, unplug it, discontinue use of the arrowhead symbol within an appliance, and have the cord replaced with an equilateral triangle is intended to exact replacement part by an authorized service alert the user to the presence of center. Protect the power cord from physical or uninsulated dangerous voltage mechanical abuse, such as being twisted, kinked, within the product’s enclosure pinched, closed in a door, or walked upon. Pay that may be of sufficient particular attention to plugs, wall outlets, and magnitude to constitute a risk of... - Page 3 Getting Started RF Radiation Exposure Statement This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Italy Notice A general authorization is requested for outdoor use in Italy. The use of these equipments is regulated by: 1. D.L.gs 1.8.2003, n. 259, article 104 (activity subject to general authorization) for outdoor use and article 105 (free use) for indoor use, in both cases for private use. 2. D.M. 28.5.03, for supply to public of RLAN access to networks and telecom services. L’uso degli apparati è regolamentato da: 1. D.L.gs 1.8.2003, n. 259, articoli 104 (attività soggette ad autorizzazione generale) se utilizzati al di fuori del proprio fondo e 105 (libero uso) se utilizzati entro il proprio fondo, in entrambi i casi per uso private. 2. D.M. 28.5.03, per la fornitura al pubblico dell’accesso R-LAN alle reti e ai servizi di telecomunicazioni. Brazil Notice Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. HLS36W-NB_DPANLLK_ENG_0448.indd 3 2011-07-13 3:51:38...
-
Page 4: Table Of Contents
Table of Contents Table of Contents Operating Basic Operations – USB Operation Other Operations Getting Started – DOLBY DRC (Dynamic Range Control) Safety Information – AV Sync Unique Features – Sleep Timer Setting – Portable In – Dimmer – Speaker ez (easy) Setup –... - Page 5 Table of Contents Troubleshooting Troubleshooting Appendix Maintenance – Handling the Unit Trademarks and Licenses Specifications HLS36W-NB_DPANLLK_ENG_0448.indd 5 2011-07-13 3:51:38...
-
Page 6: Unique Features
Getting Started Unique Features Accessories Please check and identify the supplied accessories. Portable In Listen to music from your portable device. (MP3, Notebook, etc) Speaker ez (easy) Setup Remote control (1) Batteries (2) Listen to sounds from TV, DVD or Digital device with vivid 2.1 or 2.0 ch mode. WALL BRACKET Wall bracket (1) INSTALL GUIDE (1) Optical cable (1) HLS36W-NB_DPANLLK_ENG_0448.indd 6 2011-07-13 3:51:39... -
Page 7: Introduction
Getting Started Introduction Playable file Symbols Used in this Manual MP3/ WMA music file requirement Note MP3/ WMA file compatibility with this unit is limited Indicates special notes and operating features. as follows : y Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA) Indicates tip and hints for making the task easier. > y Bit rate : within 32 to 320 kbps (MP3), Caution 40 to 192 kbps (WMA) Indicates cautions for preventing possible damages y Maximum files : Under 999 from abuse. y File extensions : “.mp3”/ “.wma” HLS36W-NB_DPANLLK_ENG_0448.indd 7 2011-07-13 3:51:39... -
Page 8: Remote Control
Getting Started Remote control • • • • • • • • • • a • • • • • • • • • 1 POWER: Switches the unit ON or OFF. AV SYNC: Synchronizes the audio and video. DOLBY DRC: Sets the Dobly DRC. MUTE: Mutes the sound. • • • • • • • • • • b • • • • • • • • • FOLDER: Searches for a folder of MP3/ WMA files. -
Page 9: Front Panel
Getting Started Front panel A Display D I STOP B USB Port E T PLAY / PAUSE C F FUNCTION F – VOL + Press it repeatedly to select other function. Adjusts speaker volume. G 1 STANDBY/ON Rear panel A PORT. (Portable) IN B OPTICAL IN 1/ 2 HLS36W-NB_DPANLLK_ENG_0448.indd 9 2011-07-13 3:51:39... -
Page 10: Connecting
Connecting Mounting the main 2. When you mount it on a wall (concrete), use the wall plugs (Not supplied). You should drill some unit on a wall holes. A guide sheet (WALL BRACKET INSTALL GUIDE) is supplied to drill. Use the sheet to check the point to drill. You can mount the main unit on a wall. Prepare screws and brackets. Step 2 Preperation Unit Wall bracket WALL BRACKET INSTALL GUIDE Note 1. Match the TV’s BOTTOM EDGE of WALL BRACKET INSTALL GUIDE with the bottom of TV and Screws and Wall Plugs are not supplied for attach to the position. mounting the unit. We recommend the Hilti (HUD-1 6 x 30) for the mounting. Please purchase it. Step 1 HLS36W-NB_DPANLLK_ENG_0448.indd 10 2011-07-13 3:51:40... - Page 11 Connecting 3. Remove the WALL BRACKET INSTALL GUIDE. 5. Hang the main unit onto the bracket as shown below. 4. Fix it with screws (not supplied) as shown in the illustration below. Step 5 Step 4 Note Detach the unit from the bracket as shown Note below. You can arrange power cord cable with the bracket as shown below. Power cord cable Power cord cable > Caution y Do not hang onto the installed unit and avoid any impact to the unit. y Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an injury or damage to the product. y When the unit is installed on a wall, please make sure that a child does not pull any of connecting cables, as it may cause it to fall. HLS36W-NB_DPANLLK_ENG_0448.indd 11 2011-07-13 3:51:40...
-
Page 12: Setting Up
Connecting Setting up Manually pairing wireless subwoofer When your connection is not completed, you can see the red LED on the woofer and woofer is not made sound. To solve the problem, follow the Pairing wireless subwoofer below steps. 1. Press and hold I STOP button on the unit LED indicator of wireless subwoofer and MUTE button on the remote control simultaneously. LED Color Status - Displays the “REMATE”. 2. Press PAIRING on back of the woofer. Blue The wireless subwoofer is - The blue LED will flicker receiving the signal of the unit. 3. Turn off and on the unit. Blue (blink) The wireless subwoofer is trying - If you see “blue” LED, it’ s successful. to connect. -
Page 13: Optional Equipment Connection
Connecting Optional Equipment OPTICAL In connection Connection Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN 1/ 2 connector. OPTICAL IN Connection AUDIO (PORT. IN) In Connection PORT.IN Connection MP3 player, etc... To the digital optical output jack of your component Speaker ez (easy) setup Listening to music from your Listens to sound from TV or DVD or Digital Device with 2.1 or 2ch mode. portable player 1. Connect the unit’s OPTICAL IN 1/ 2 jack to jack The unit can be used to play the music from many on optical out of your TV (or Digital Device etc.). -
Page 14: Usb Playback
Connecting USB Playback Compatible USB Devices y MP3 Player : Flash type MP3 player. Insert USB memory device to the USB port on the front of the unit. y USB Flash Drive : D evices that support USB2.0 or USB1.1. y The USB function of this unit does not support USB Connection some USB devices. USB device requirement y Devices which require additional program installation connected to a computer, are not supported. y Do not extract the USB device while in operation. y For a large capacity USB, it may take longer than a few minutes to be searched. y To prevent data loss, back up all data. y If you use a USB extension cable or USB hub, the USB device is not recognized. Removing the USB Device from the unit. y Using NTFS file system is not supported. (Only 1. Choose a different function mode or press FAT(16/32) file system is supported.) I STOP twice in a row. -
Page 15: Operating
Operating Basic Operations Other Operations USB Operation DOLBY DRC (Dynamic Range Control) 1. Connect the USB device to the USB port. 2. Select the USB function by pressing INPUT. Make the sound clear when the volume is turned down (Dolby Digital only). Set to [DRC ON] by using 3. Select a file you want to play by pressing DOLBY DRC. C or V. Do this AV Sync Stop Press Z When receiving audio signals from TV, sound and images may not be matched. In the case, this Playback Press d/M function can adjust the delay time. Press d/M Pause 1. Press AV SYNC. During playback, press C 2. Use C V to scroll up and down through or V to go to the next file the delay amount, which you can set at... -
Page 16: Sleep Timer Setting
Operating Sleep Timer Setting Displaying file and input source Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will You can display various information on the USB and turn off. OPTICAL IN 1/ 2 mode by pressing INFO.. To check the remaining time, press SLEEP. USB : MP3/ WMA containing file information To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press OPTICAL IN 1/ 2 : Audio format, Audio channel SLEEP once again while “SLEEP 10” is displayed. Note You can check the remaining time before the Unit turns off. Press SLEEP The remaining time appears in the display window. Dimmer Press SLEEP once. The display window will be darken by half. To cancel it, press SLEEP repeatedly until dim off. Turn off the sound temporarily Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone, appearing the in the display window. Adjust the woofer level settings You can adjust the sound level of woofer. -
Page 17: Sound Adjustment
Operating Note Sound adjustment y In some of surround modes, some speakers, there’s no sound or low sound. It depends on the mode of surround and the source of Setting the surround mode audio, it is not defective. y You may need to reset the surround mode, This system has a number of pre-set surround after switching the input, sometimes even sound fields. You can select a desired sound mode after the sound file changed. by using SOUND EFFECT. The displayed items for the equalizer may be different depending on sound sources and effects. On Display Description You can enjoy comfortable NATURAL and natural sound. You can enjoy the sound BYPASS without equalizer effect. The BASS is Bass Blast. During playback, reinforce the treble, BASS bass and surround sound effect. The CLRVOICE is Clear Voice. This program make voice sound clear, improving the CLRVOICE quality of voice sound. (We encourage to use this EQ... -
Page 18: Using Bluetooth Technology
INPUT. Connecting individual devices under Appears “BT” and then “BT READY” in display Bluetooth® wireless technology does not incur any window. charges. A mobile phone with 2. Operate the Bluetooth device and perform the Bluetooth® wireless technology can be operated pairing operation. When searching for this unit via the Cascade if the connection was made via with the Bluetooth device, a list of the devices Bluetooth® wireless technology. found may appear in the Bluetooth device Available Devices : Mobile phone, MP3, Laptop, display depending on the type of Bluetooth PDA (This units be supported the Stereo Headset.) device.Your unit appears as “LG AUDIO”. 3. Enter the PIN code. Bluetooth Profiles PIN code : 0000 In order to use Bluetooth wireless technology, 4. When this unit successfully paired with your devices must be able to interpret certain profiles. Bluetooth device, Bluetooth LED of this unit This unit is compatible with following profile. lights up and appears “PAIRED”. A2DP (Advanced Audio Distribution Profile) Note AVRCP (Audio/ Video Distribution Remote Control y Depending on the Bluetooth device type, Profile) some device have a different pairing way. y This function is recommended to use to listening to music. While using Bluetooth... -
Page 19: Listening To Sound Through The Bluetooth Devices
Operating Listening to sound through Operating with Bluetooth device the Bluetooth devices You can operate a unit by connecting a Bluetooth device using AVRCP. For details about operation, refer to the Bluetooth device’s User Guide. Pairing your unit and Bluetooth Note device These operations may not be vailable for Before you start the pairing procedure, make certain Bluetooth device. In addition, the sure the Bluetooth feature is turned on in to your actual operations may differ depending on the Bluetooth device. Refer to your Bluetooth device’s connected Bluetooth device. user guide. Once a pairing operation is performed, it does not need to be performed again. 1. Select a function other than the Bluetooth Connecting and disconnecting with a function by using the INPUT. Bluetooth device 2. Place the Bluetooth device to be connected to This function is operated after pairing. -
Page 20: Checking The Information Of Connected Bluetooth Device
Operating Note Checking the information of y This units does not be supported the Mono connected Bluetooth device Headset Profile (Hands Free Profile) This function is operated after pairing. You can y The sound may be interrupted when check the Bluetooth information. the connection interfered by the other electronic wave. Press and hold INFO. repeatedly. Bluetooth information is changed as follows. y You cannot control the Bluetooth device Local Bluetooth Device Address Device Name with this unit. None ... y Pairing is limited one Bluetooth device per one unit and multi-pairing is not supported. y Although the distance between your Bluetooth and the set is less than 10m, there are obstacles between both, your Bluetooth device cannot be connected. y Depending on the type of the device, you may not be able to use the Bluetooth function. y You can enjoy wireless system using phone, MP3, Notebook, headset, etc.. -
Page 21: Controlling A Tv With The Supplied Remote Control
Operating Controlling a TV with Setting up the remote to control your TV the Supplied Remote You can operate your TV with the supplied remote Control control. If your TV is listed in the table below, set the appropriate manufacturer code. You can control your TV using the buttons below. 1. While holding down 1 (TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below). Manufacturer Code Number 1(Default), 2 Zenith 1, 3, 4 Button Operation GoldStar 1, 2 1 (TV POWER) Turn the TV on or off. Samsung 6, 7 Switch the TV’s input source AV/INPUT... -
Page 22: Troubleshooting
Troubleshooting Troubleshooting PROBLEM CORRECTION Plug in the power cord. No Power Check the condition by operating other electronic devices. Press FUNCTION and check the selected function. The power cord of woofer is not connected. Plug the power cord into the wall outlet securely. No sound Pairing between the unit and woofer gets disconnected. Connect the unit and woofer. (Refer to the page 12) The remote control is too far from the unit. Operate the remote control within about 23 ft (7m). The remote There is an obstacle in the path of the remote control and the unit. control does Remove the obstacle. not work properly. The battery in the remote control is exhausted. Replace the battery with new one. HLS36W-NB_DPANLLK_ENG_0448.indd 22 2011-07-13 3:51:41... -
Page 23: Appendix
Appendix Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean y Do not use volatile liquids such as insecticide spray near the unit. y Wiping with strong pressure may damage the surface. y Do not leave rubber or plastic products in contact with the unit for a long period of time. Cleaning the unit To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. HLS36W-NB_DPANLLK_ENG_0448.indd 23 2011-07-13 3:51:41... -
Page 24: Trademarks And Licenses
Appendix Trademarks and Licenses Manufactured under license from Dolby Labo- ratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. Bluetooth® wireless technology is a system which allows radio contact between electronic devices within a max. range of 10 meters. Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless tech- nology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology. The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners. HLS36W-NB_DPANLLK_ENG_0448.indd 24 2011-07-13 3:51:42... -
Page 25: Specifications
Appendix Specifications General Power requirements Refer to main label. Power consumption Refer to main label. Dimensions (W x H x D) 1 000 x 80 x 50 mm without foot Net Weight (Approx.) 2.3 kg Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Operating humidity 5 % to 90 % Bus Power Supply (USB) DC 5 V 0 500 mA Inputs DIGITAL IN (OPTICAL IN) 3 V (p-p), Optical jack x 2 PORT. IN 0.5Vrms (3.5 mm stereo jack) Amplifier Stereo mode 70 W + 70 W (4 Ω at 1 kHz) Subwoofer 140 W (3 Ω at 60 Hz) Wireless subwoofer Power requirements Refer to main label on the Subwoofer. Power consumption Refer to main label on the Subwoofer. Reception Output 5.8 GHz Type 1 Way 1 Speaker Impedance Rated 3 Ω Input Power 140 W Max. Input Power 280 W... - Page 26 HLS36W-NB_DPANLLK_ENG_0448.indd 26 2011-07-13 3:51:42...