Positioning The Seat; Unlatching The Seat - Toro 72946 Operator's Manual

1. Sit on the seat, engage the parking brake, and
move the blade-control switch (PTO) to the O
position. Try starting the engine; the engine
should not start.
2. Sit on the seat, engage the parking brake, and
move the blade-control switch (PTO) to the O
position. Move either motion-control lever out
of the N -
EUTRAL LOCK
engine; the engine should not start. Repeat for
the other control lever.
3. Sit on the seat, engage the parking brake,
move the blade-control switch (PTO) to the O
position, and move the motion-control levers
to the N -
EUTRAL LOCK
engine. While the engine is running, disengage
the parking brake, engage the blade-control
switch (PTO), and rise slightly from the seat; the
engine should shut off.
4. Sit on the seat, engage the parking brake,
move the blade-control switch (PTO) to the O
position, and move the motion-control levers
to the N -
EUTRAL LOCK
engine. While the engine is running, center
either motion control and move (forward or
reverse); the engine should shut off. Repeat for
other motion control.
5. Sit on the seat, disengage the parking brake,
move the blade-control switch (PTO) to the O
position, and move the motion-control levers
to the N -
EUTRAL LOCK
engine; the engine should not start.
position. Try starting the
position. Now start the
position. Now start the
position. Try starting the

Positioning the Seat

N
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable
FF
FF

Unlatching the Seat

FF
To unlatch the seat, push the seat latch forward
(Figure 11).
FF
1. Seat latch
18
(Figure 10).
Figure 10
Figure 11
2. Seat
g019754
g008956