EMU48593
CL5 Display
The CL5 Display shows engine status and
alert information. The display can be
changed. This manual mainly covers the alert
display.
If a warning message appears on the CL5
Display, follow the instructions on the dis-
play.
TIP:
The functions shown in the display varies
according to the equipment of the boat.
For more information, see the CL5 owner's
manual.
1. Touchscreen
2. Power button
1 2 3
13 12 11
1. Autopilot button (Equipped with an Autopilot
panel)
2. Boat status
3. Speedometer
4. Shift position
5. Tank level
4
5
6
7 8
10
9
Instruments and indicators
6. Engine condition
7. Boat control indicator
8. Boat control mode button (Equipped with a
Joystick)
9. Trim angle
10.Engine alert
11.Tachometer
12.Sub status
13.Engine status
GPS signal strength icons
The icons shown in the upper-right of the en-
gine screen indicate the GPS signal strength.
" " shows GPS satellite signal strength ac-
cording to the number of antenna symbol.
" " shows no GPS antenna connection.
TIP:
To use the GPS feature, a GPS receiver must
be connected to this device.
Contact your Yamaha dealer for information
1
on how to connect a GPS receiver.
Engine condition icons
Orange icons indicate engine conditions.
2
Yamaha Security System indicator " "
(optional)
This indicator appears when the Yamaha
Security System is in lock mode. Make
sure it is off before starting the engine.
TIP:
This function is displayed when the 6X6
switch panel is equipped.
Engine warm-up indicator " "
This indicator appears while the engine is
being warmed up and goes off when
warming-up is finished.
Engine synchronization indicator " "
In multiple engine types, this indicator ap-
pears while the engines are under synchro-
nization control. It goes off when engine
synchronization control is released.
31