Polaris RZR XP 1000 EPS Owner's Manual page 109

Filter Systems
Air Filter
Always change the air filter at the
intervals outlined in the Periodic
Maintenance Chart beginning on
page 79.
1. Remove the cargo box access
panel.
2. Clean all dirt and debris from
the air box area.
3. Unlatch the four (4) air box
cover clips and carefully
remove the air box cover.
4. Inspect the air filter and air box
for dirt, debris or water.
5. To remove the filter, slide the
filter toward the passenger's side
of the vehicle.
6. With the filter removed, clean
the intake tube and air box
thoroughly. Wipe well with a
clean, dry cloth.
NOTICE: Dirt or debris in the intake
tube could result in severe
engine damage. Always
clean all dirt and debris from
the intake tube before
installing the filter.
7. Reinstall the air filter (if clean) or install a new air filter (if soiled).
Do not attempt to clean the air filter.
NOTICE: Use of a non-POLARIS-approved air filter may cause engine
damage. Replacement filters are available at your POLARIS dealer.
8. Make sure that there are no gaps between the filter, the filter ring
and the stop on the intake tube.
9. Reinstall the air box cover and ensure the alignment tabs are
properly positioned.
10. Secure the four (4) cover clips.
11. Reinstall the cargo box access panel.
MAINTENANCE
Cover Clips
Air Filter
107