D-Link DIR-615 Quick Installation Manual page 19

DIR-615 Quick Installation Guide
5. If your ISP uses MAC address binding, in the Ethernet section, in the
MAC field, enter the MAC address registered by your ISP upon
concluding the agreement. To set the MAC address of the network
interface card (of the computer that is being used to configure the router at
Clone
the moment) as the MAC address of the WAN interface, click the
MAC address of your computer icon ( ). To set the address of a
device connected to the router's LAN at the moment, select the relevant
value from the drop-down list (the field will be filled in automatically). To
set the router's MAC address as the MAC address of the WAN interface,
Restore default MAC address
click the icon ( ).
6. If your ISP uses authorization via the 802.1x protocol, in the
Authorization via 802.1x protocol section, select the Authorization
in the ISP's network via 802.1x protocol checkbox. Fill in the fields
of the section in accordance with data provided by your ISP. The section is
not displayed for the connection of PPPoE, IPv6 PPPoE, PPPoE Dual
Stack, Static IPv6, and Dynamic IPv6 types.
19