LG 26LV2500 Service Manual page 13

- Manual Download
* Caution
1) Use the proper signal cable for EDID Download
- Analog EDID : Pin3 exists
- Digital EDID : Pin3 exists
2) Never connect HDMI & D-sub Cable at the same time.
3) Use the proper cables below for EDID Writing
4) Download HDMI1, HDMI2, separately because HDMI1 is
different from HDMI2
For Analog EDID
D-sub to D-sub
4.7 Outgoing condition Configuration
■ Push'IN STOP' key, then in-stop processing will start.
If processing is complete, TV will turn off automatically.
*Must not AC power OFF during processing.
4.8 Internal pressure
Confirm whether is normal or not when between
power board's ac block and GND is impacted on
1.5kV(dc) or 2.2kV(dc) for one second.
Copyright © 2011 LG Electronics. Inc. All rights reserved.
Only for training and service purposes
All manuals and user guides at all-guides.com
For HDMI EDID
DVI-D to HDMI or HDMI to HDMI
- 13 -
LGE Internal Use Only