Assembly Instructions - Black & Decker BD17204 Instruction Manual

ASSEMBLY INSTRUCTIONS

Before beginning assembly of product, make
sure all parts are present. Compare parts with
package contents list and hardware contents
list. If any parts are missing or damaged, do
not attempt to assemble the product. Contact
customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools required for assembly (not included):
Phillips Screwdriver
1. Turn the base (A) upside down, then attach
the wheel assembly (B) to the base (A) using
2 M8 flange nuts (AA) and 2 M8x16 bolts (BB).
Attach 3 anchoring arms (KK) to the base (A)
using 6 M6 flange nuts (CC) and 6 M6x12 flange
bolts (DD). Tighten bolts securely.
BB
AA
B
A
DD
CC
KK
E
2. Attach the tank housing cover (E) to the tank
housing (D) using 4 M6x12 bolts (DD). Tighten
bolts securely.
E
DD
3. Attach the support pole (G) to the tank
housing cover (E) using 4 M6x12 bolts (DD). Be
sure that the lighting label faces the door side.
Tighten bolts securely.
Place the decorative cap (F) on the support
pole (G) and slide the decorative cap onto the
tank housing cover (E) gently.
G
DD
D
F
G
9