Controlling The Display Backlight; Locking And Unlocking The Keypad And Controls; Turning The Controls And Keypad Buttons Tones On Or Off - Motorola APX 6000 User Manual
Hide thumbs
Also See for APX 6000:
- User manual (106 pages) ,
- Quick reference card (2 pages) ,
- Quick reference card (2 pages)
Table of Contents
Advertisement
7.31.6
Controlling the Display Backlight
You can enable or disable the radio display backlight as needed, if poor light conditions make the
display or keypad difficult to read.
You can also maintain a minimum backlight level on the radio front display, depending on how your
radio is programmed.
NOTE: The backlight setting also affects the Menu Select buttons and Navigation button
backlighting accordingly.The backlight setting also affects the Menu Select buttons, the
Navigation button, and the keypad backlighting accordingly.
The backlight remains on for a programmed time before it automatically turns off completely or
returns to the minimum backlight level.
Procedure:
Perform one of the following actions:
•
To turn the backlight on, press any programmable radio controls or buttons. To turn the
backlight on, press any key of the keypad, the Menu Select or Navigation button, or any
programmable radio controls or buttons.
7.31.7
Locking and Unlocking the Keypad and Controls
You can lock the keypad, programmable buttons, rotary knobs, and switches of your radio to avoid
inadvertent entry.
Check with your dealer or qualified technician for best selection to suit your usage.
Procedure:
1 Toggle the programmed Keypad/Control Lock button or switch to on.
The display shows Kypd/Ctrl Lock.
2 Toggle again to unlock the controls.
7.31.8
Turning the Controls and Keypad Buttons Tones On or Off
When and where to use: You can enable and disable the tones of Navigation buttons, controls and
keypad if needed.
Procedure:
•
Turning the tones on or off using the preprogrammed Mute button:
a. To turn the tones off or on, press the preprogrammed Mute button.
•
Turning the tones on or off using the radio menu:
a.
or to Mute.
b. Press the Menu Select button directly below Mute.
The display shows momentary Tones off, indicating that the tones are disabled or the
display shows momentary Tones on, and you hear a short tone indicating that the tones are
enabled.
68012001079-JW
Chapter 7 : Advanced Features
131
Advertisement
Table of Contents
