Removing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
2
Remove the
3
Remove the
Procedure
1
Disconnect the speaker cable from the system board.
2
Note the speaker-cable routing on the display-panel base.
3
Remove the speaker cable at an angle from the VESA-mount bracket.
4
Remove the screw from the VESA-mount bracket.
5
Peel off the tape that secures the speaker cable to the VESA-mount
bracket.
6
Note the routing of the speaker cable connecting the left speaker to the
right speaker and the position of the rubber grommets on the computer
bezel.
computer. After working inside your
stand
assembly.
back
cover.
speaker
cover.
After working inside your
67