Panasonic DMR-BW880 Operating Instructions Manual page 83

∫ HDMI Connection
HDMI Video Mode
Select "On" when video is output from HDMI AV
OUT terminal. Select "Off" for all other conditions.
HDMI Video Format
You can only select items compatible with the
connected equipment.
≥If "Automatic" is selected, the output resolution
best suited to the connected TV (1080p, 1080i,
720p or 576p/480p) is automatically selected.
≥To enjoy High Quality Video up-converted to
1080p, you need to connect the unit directly to
1080p compatible HDTV. If this unit is
connected to an HDTV through other
equipment, it must also be 1080p compatible.
24p Output
When playing BD-Video recorded in 24 frames,
this unit displays each frame at 1/24 second
intervals–the same interval originally shot with
the film movie.
≥This item is effective only when this unit is
connected to a TV supporting 1080/24p output
using an HDMI cable and "HDMI Video Format"
is set to "Automatic" or "1080p".
≥When BD-Video images other than 24p are
played, images are output at 60p.
Deep Colour Output
This setting is for selecting whether to use Deep
Colour output when a TV that supports Deep
Colour is connected.
HDMI Audio Output
Select "Off" when connected to a TV with an HDMI
cable, and connected to an amplifier not compatible
with HDMI with a DIGITAL AUDIO OUT terminal
7.1ch Audio Reformatting
[BD-V]
Surround sound with 6.1 ch or less is automatically
expanded and played back at 7.1 ch.
≥If "Off" is selected, sound is played over the
original number of channels. (Note that in the
case of 6.1 ch audio, playback will be at 5.1 ch)
Audio reformatting is enabled in the following cases:
–When you have selected "PCM" in "Digital
Audio Output".
–When the audio is Dolby Digital, Dolby Digital
Plus, Dolby TrueHD or LPCM.
HDCP on HDMI Output
If you connect a DVI device that is not compatible
with HDCP, set to "Off". In this case, some
programmes, BD-Video or DVD-Video cannot be
seen.
Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports Contents Type Flag is
connected.
VIERA Link
Set to use "HDAVI Control" function when
connected with an HDMI cable to a device that
supports "HDAVI Control".
≥Select "Off" when you do not want to use
"HDAVI Control".
∫ AV1 Output
Set according to the terminal of the connected TV.
≥If this unit is connected with an HDMI cable, you
cannot select "RGB 1" or "RGB 2".
≥When a decoder is connected, do not set to
"RGB 1".
∫ AV2 Settings
AV2 Input
Set to "RGB / Video" or "RGB" when receiving or
recording RGB output from external equipment.
Ext Link
Set "Ext Link 1" when a Set Top Box which
transmits a control signal via the 21-pin Scart
cable is connected.
≥This setting cannot be made when "TV System"
is set to "NTSC" ( 82).
83
VQT2J65